25 Watt Portable Explosion Proof LED Light – 120-277V AC Stepped Down to 12 or 24 V DC – 3,500 Lumens – Non-Spark Aluminum Magnetic Base
$74.99
Specifications / Additional InformationEPL-BS-70LED-6XMB-150X12 – Explosion Proof LED LightRatings/ApprovalsListing: United States – CanadaClass I, Divisions 1 & 2, Groups C and DLamp Technology: LEDClass II, Divisions 1 & 2, Groups E, F and GDimensions: 15.25″-H x 10.5″-W x 9.25″-DClass III, Divisions 1 & 2Weight: 25 lbNRTL Certified to UL 844…
| EPL-BS-70LED-6XMB-150X12 – Explosion Proof LED Light | Ratings/Approvals |
| Listing: United States – Canada | Class I, Divisions 1 & 2, Groups C and D |
| Lamp Technology: LED | Class II, Divisions 1 & 2, Groups E, F and G |
| Dimensions: 15.25″-H x 10.5″-W x 9.25″-D | Class III, Divisions 1 & 2 |
| Weight: 25 lb | NRTL Certified to UL 844 Ed. 13 |
| Voltage: 100-277 Volts AC, 50/60 Hz Stepped Down to 12 or 24 V DC via Encapsulated Inline Stepdown Transformer | NRTL Certified to UL 1598 |
| Total Watts: 50W | NRTL Certified to C22.2 No. 137 Rev 2009 |
| Total Lumens: 7,000 lms | NRTL Certified to C22.2 No. 250.0 |
| Luminous Efficacy: 140 Lm/w | NRTL Certified to C22.2 No. 30-M-1986 Rev 2012 |
| Lamp Life: 60,000+ Hours | T5 Temperature Rating |
| Color Temp: 5600K, 4500K, or 3000K | Paint Spray Booth Approved |
| Color Rendering Index: >75 CRI | IEC 60529 Tested |
| Lamp Type: – | IP67 Rated Waterproof |
| Lamp Base: – | LEL Approved |
| Replacement Lamp: – | Single LED Driver |
| Beam Angle: 60°, 125°, or 140° | 80% Lumen Retention after 60,000 Hours |
| Lighting Configuration: Flood Pattern | Factory Sealed Light Fixture |
| Power Efficiency: >95% | Surge Protection |
| Power Factor: 0.99 | Replacement for 250W Metal Halide Lamps |
| Amps: 0.42 A @ 120 V, 0.21 A @ 240 V, 0.18 A @ 277 V | |
| Ambient Operating Temp Range: -50°C to +65°C |  |
| Operating Temp Rating: T5 | Â |
| Temperature Rise: 11°C (10°F) Over Ambient |  |
| Housing Material: Copper Free Cast Aluminum | Â |
| Housing Finish: Epoxy Powder Coated – Grey | Special Orders – Requirements |
| Lens Material: Hardened Borosilicate Glass | |
| Gasket Material: Silicone | |
| Mounting: Triangular Shaped Aluminum Base Stand with (4) 100 lb Magnetic Feet | |
| Wiring: 150′ SOOW Cord w/ General Area Cord Cap & Waterproof 12-24 V DC Transformer | |
| Cord Cap Options: 5-15, 6-15, 5-20, 6-20, L5-15, L6-15, L5-20, L6-20, BS1363, Schuko, or Pigtail |
‘Product Overview‘
window.open(theURL,winName,features);
}
Made in the USAThe EPL-BS-70LED-6XMB-150X12 Explosion Proof LED Light provides operators with a powerful alternative to traditional hazardous location luminaries. The spun aluminum mount and LED lamp used with this unit provide operators with excellent power and efficiency coupled with high versatility and ease of use. An included transformer steps down voltages from 110-277 V AC to 12 V DC or 24 V DC for low voltage applications.The EPL-BS-70LED-6XMB-150X12 is a Class I, Division 1 & 2 and Class II, Division 1 & 2 explosion proof light fixture that is designed for energy efficient and superior illumination in combustible environments. This 50-watt LED fixture offers 7,000 lumens of high quality light with a color temperature of 5600K. We also offer a 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). Serving as a suitable replacement for 250-watt metal halide lamps, a color rendering index of 75 ensures colors and details are produced more accurately than high pressure sodium or mercury vapor luminaries.This portable LED lighting solution for explosive sites is IP67 rated, dust-proof and protected against high pressure jets and temporary submersion. The aluminum frame features an explosion proof switch built into the cord wrap on the back of the unit. The copper-free aluminum alloy housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronic components. An epoxy powder coated finish facilitates durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000-hour rated lifespan with 80% lumen retention. The explosion proof LED light also offers operators convenience in the form of field serviceability.LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.LED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the EPL-LB-50LED-RT to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.
Voltage: The light is universal voltage capable and can be operated with 100-277 V AC, 50/60 Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts.
Wiring/Plug: This explosion proof LED light is equipped with 150 feet of 16/3 chemical and abrasion resistant SOOW cord leading to an encapsulatedstep down transformer. There is three feet of 16/3 SOOW cable coming out of the inline transformer, that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110 V wall outlets with ground, standard 5-20 20 amp straight blade plug for 110 V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240 V wall outlets with ground, standard 6-20 20 amp straight blade plug for 220-240 V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L5-20 20 amp twist lock plug for 125 V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, NEMA L6-20 20 amp twist lock plug for 240 V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250 V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.*PLEASE NOTE: While the light fixture on this unit is explosion proof, the included cord cap is NOT explosion proof and must be connected outside of the hazardous area.*
Beam Angles: When used as a portable lighting solution, the varying beam angles are each individually ideal for several environments. The 60° beam provides the most intense beam of the three options. It is perfect for narrow, confined spaces and is ideally suited for tank cleaning purposes. It offers focused light to provide ample illumination to tight work spaces and other environments. The 125° beam offers a more diffused source of light that is also less intense in brightness. It is a great general area work light and performs well when used for outdoor illumination. The 140° beam offers a very wide lighting pattern and is ideal for situations where lighting distance is not a concern, but illumination of a wider area and even light distribution is. The 140° beam is great for situations that call for working in close proximity to lights such as in a paint booth.Mounting: The EPL-BS-70LED-6XMB-150X12 features four 100 lb magnetic feet that provide a strong magnetic pull to stabilize the light fixture during deployment, reducing movement of the light from vibrations or accidental bumps.Suggested Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants, and more. |
Be the first to review “25 Watt Portable Explosion Proof LED Light – 120-277V AC Stepped Down to 12 or 24 V DC – 3,500 Lumens – Non-Spark Aluminum Magnetic Base”
Related products
LARSON ELECTRONICS
24″ Explosion Proof Exhaust Fan – 6860 CFM – 1HP, 230-480V AC Three Phase – Roof Mounted
LARSON ELECTRONICS
3-Phase Delta Buck/Boost Step-Up Transformer – 600V Primary – 480V Secondary – 9.6 Amps – 50/60Hz
LARSON ELECTRONICS
1000 Watt High Pressure Sodium Flood Light – 110,000 Lumens – Slipfitter Mount – 120~277 Volts AC
LARSON ELECTRONICS
160W High Intensity LED Light – 21,600 Lumens – 120-277VAC – 0-10V Dimmable – 6′ 16/5 SOOW Line-In
LARSON ELECTRONICS
10′ 4/4 SOOW Weatherproof Extension Power Cord – 60 Amps Rated – 250V – 3P4W Plug/Connector
LARSON ELECTRONICS
2W Explosion Proof Antenna – C1D1 – 2.4 GHz – 3/4″ NPT – ATEX/IECEx Rated
Reviews
There are no reviews yet.