500 x 0.001 g Precision Balance – 1 mg Digital Analytcial Lab Scale

Introduction

The USS-DBS64-5 precision balance, with a capacity of up to 500g and a readability of 0.001g, is ideal for applications requiring a moderate level of precision. The strain gauge weighing sensor ensures reliable results, while the backlit LCD display provides clear readings.
It is well-suited for tasks like chemical experiments, pharmaceutical formulations, and food processing where a degree of precision is required, but it may not be the best choice for highly specialized applications demanding the highest accuracy.

Features

• Readability: 0.001g with strain gauge
• Capacity: 0.01g-500g
• Stabilization Time: ≤3 seconds
• External Calibration: Manual calibration with weights
• 10 Weighing Units Conversion: g, ct, oz, ozt, lb, TOL, dwt, MM, kg and %
• Both AC/ DC power supply: AC 100V-240V power or 9V battery(battery not included)
• Built-in Applications: parts counting, percentage function, tare function, fault display and etc.

More Details

User Manual

To learn how to install, calibrate, set up, and use this product, please refer to the user manual.

Packing List

*To view the full table on mobile, please swipe left or right on the screen.

Technical Data

*To view the full table on mobile, please swipe left or right on the screen.

Precautions

• Leveling the Balance: Accurate horizontal positioning necessary for repeatable measurementsand exact results. Adjust the leveling feet of the analytical balance until the air bubbleinthe indicator is centered.
• Warm-Up Requirement: For accurate results, the balance must warm up for at least 30 minutes after being powered on or after a power outage longer than 30 minutes, to reach the proper operating temperature before calibration or use.(For warm-up time details, refer to the user manual or contact support.)
• Stability: Place the balance on a stable, vibration-free surface, away from drafts and electromagnetic interference. It’s important to note that high-precision balances are more susceptible to environmental factors, which can affect reading stability.
• Calibration: Calibrate the balance if it is moved (even within the same room), when ambient conditions change, and before each use. If pressing the “CAL” button has no effect, ensure you are pressing and holding it. For most models, calibration requires a long press rather than a quick tap.(Refer to the manual for specific instructions).

Troubleshooting

Problem	Cause	Solution
Display not working	No power supply	Plug in the adapter
Display shows ““	Object weight below minimum threshold, taring issues exist, or balance is not properly calibrated.	Make sure item being weighed is at least 10mg. Make sure receptacles have been tared, and the balance has been properly calibrated.
Display shows ““	ltem being weighed is over maximum allowable weight.	Make sure balance is properly calibrated, and make sure item is below maximum allowable weight.
Display shows “Err-1”	Power issues with the balance.	Machine may have a poor power connection. Check the power in the back, and the outlet. Leave machine off for several minutes, unplug fully, then reconnect and beqin again.
Display shows “Err-2”	Unstable weighing conditions.	Recalibrate machine make sure balance is level, and make sure item being weighed is fully stable.

All Options