[Discontinued] New Atten Soldering Iron 220V 50Watt AT SS-50

Description:

AT-SS-50 is one portable, variable temperature controlled soldering iron.
It is one portable, temp-control and temp adjustable soldering iron. Ceramic heater, and three cores grounding wire ensures safety of soldering works.
S

• Built-in temperature controlled circuit and rotational controller type thermoregulation, and easy to operate.
• Handgrip structure is designed according to the ergonomics, and comfortable to grip.
• Temperature controlled status is displayed by using high bright blue LED lamps.
• Both the heater and sensor feature PTC material, which helps rapid temperature rise and precise temperature control.
• Portable design facilitates carries of the product users.
• Three-core earthing electric power line

Specification:

• Power Consumption: 50W
• Input Voltage: 220VAC±10% 50Hz
• Temperature Range: 200 ~ 500? (392 ~ 932?)
• Temperature stability: ±2?(still air and have no load)
• Temperature Accuracy: ±10?
• Tip to Ground Impedance: <2Ω
• Tip to Ground Voltage: <2mV
• Setting Mode: Knob Adjustment
• Heating Core: Four-core Ceramics Heating Core
• Handgrip Length:  245mm
• Weight: Ca. 0.2Kg

Please Note that this Soldering Iron can NOT be used at 110V.

Safety Guidance
General Safety Rules

Please operate strictly as following rules for safety.

The tip temperature reach 200 �500? when power is on. Please read all instructions. Failure to follow all instructions listed below may result in electric shock, fire, or serious injury:

• Do not touch the tip and metal surrounding.
• Do not use the soldering iron near inflammable materials.
• Warn bystanders not to touch the tip.
• Please cut off the power after work finished.
• Do not change power wire personally or extend the wire.
• User should be trained technically before using.
• Keep children and bystanders away while operating a power tool.
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

• Do not use the iron to non-welding works.
• Do not hit the iron tip heavily for tin removing.
• Do not re-assemble this soldering iron personally.
• Please only use identical replacement parts.
• Do not put the solder iron in the water.
• Please hold plug tightly when plug-out of power, do not pull the wire.
• Please operate this soldering iron in a well-ventilated area because of smoking caused.
• Do not do other dangerous activity with the iron.

Operating Instruction:

• Make sure the input power before using the iron.
• Turn around temperature control button, set temperature according to your needs.
• Plug the power wire into socket.
• When the indicator lights, temperature is rising.
• When power light glitters, the tip temperature reaches the preset temperature.
• Do soldering work normally with the soldering Iron.