QIDI – X-Max 3 3D Printer

Overview

– Faster Speed 600mm/s

– Build Volume: 325 x 325 x 315mm

– High-Flow 35mm³/s

– Acceleration: 20000mm/s²

Max 3 configures the below technologies for fast printing

Klipper 64-bit Processor

Cortex-A53

Main frequency 1.5GHz, 8G-EMMC, and 1G DDR3

New All-metal Frame

Ultra-stable, reinforced with metal crossbeams at the bottom, resistant to deformation

High-grade Hardness Steel Linear Hollow Optical Axis

– Improved surface straightness, and a 60% lower error deflection

– Highly durable and no need for frequent maintenance

– Typically lasts a lifetime without the need for replacement

CoreXY Structure

Reduce the motion Inertia and improve the motion speed

TMC2209 silent drive results in less noise

New Cooling System

Reducing the risk of clogs and ensuring smooth extrusion

9.5:1 Gear Ratio

Steadier, powerful, faster extrusion

Two Sets of Hot End

– Copper alloy nozzle for better thermal conductivity and smooth printing

– Hardened steel nozzle best used for abrasive materials and long term usage

– Both nozzles have a 350℃ Max Print Temp

Temperature Controlled Chamber and Drying Box

– Active heating device with maximum temp 65℃

– High efficiency printing with PET-CF, PAHT-CF, etc.

– Chamber circulation fan with activated carbon air filter

No Layer Separation

The higher the temperature in the heated chamber, the larger the material range that can be printed.

The heated chamber ensures that the print is built uniformly without the generation of internal stresses.

Automatic Leveling

Klipper Adaptive Meshing and Purging ensures flawless first layer for every 3D print.

Flexible HF Plate

Excellent adhesion, No warping trouble, Easy to remove the prints.

Specifications