加入心愿单
BEA R2E-100 Request to Exit Security Sensor | BEA-10R2E-100
BEA R2E-100 Request to Exit Security Sensor | BEA-10R2E-100 - Image 2

BEA R2E-100 Request to Exit Security Sensor | BEA-10R2E-100

    $16.99

    BEA R2E-100 Request to Exit Security Sensor | BEA-10R2E-100Focused Active Infrared Request to Exit SensorBEA’s UL Listed R2E-100 is a request-to-exit sensor with an active infrared (AIR) detection zone focused directly on the door handle. This allows the R2E-100 to only detect people intending to exit through the door as…

    SKU: GPP75808454 Category:

      BEA R2E-100 Request to Exit Security Sensor | BEA-10R2E-100

      Focused Active Infrared Request to Exit Sensor

      BEA’s UL Listed R2E-100 is a request-to-exit sensor with an active infrared (AIR) detection zone focused directly on the door handle. This allows the R2E-100 to only detect people intending to exit through the door as they reach for the door handle.

      The AIR based R2E-100 improves accuracy of detection as compared to passive infrared (PIR) technology including ground based errors, PIR sensor spoofing, known PIR vulnerabilities (hot air, background objects, cross traffic).

      Features
      • Standards compliant: UL 294 / ULC S319 Listed
      • Define your tilt angle: Adjustable tilt angle from 0 – 10°
      • Customizable detection zones: Adjustable detection range from 20 – 48 inches (The R2E-100 can accommodate swinging doors up to 7 feet)
      • Low profile mounting – Low profile sensor mounts on or above the door frame.
      Specifications
      • Detector Type: Active, focused Infrared
      • Supply Voltage: 12 – 24 VAC/VDC ±10%, 60 Hz
      • Current Consumption: 155 mA (sounder off) / 200 mA (sounder max volume)
      • Temperature: -20 – 120°F (-29 – 49°C). For UL Listed installations, the temperature range is 32 – 120°F (0 – 49°C).
      • Humidity: 0 – 93% non-condensing for ULC-S319 installations; 0 – 85% non-condensing for UL-294 Listed installations
      • Detection Distance (Range): Potentiometer adjusted from 20 – 48”
      • Relay: Two Form “C” contact sets rated for 1.3A @ 24 VAC / 1.3A @ 30 VDC0.6pf (Power Factor)
      • Relay Hold Time: Potentiometer adjusted from 0.5 – 60 seconds
      • Sounder: 85 dB max with adjustable volume
      • Indicator LEDs: Green, red, yellow, orange
      • REX Input: DRY Contact, normally-opened (NO)
      • Card Reader Input: DRY Contact, normally-closed (NC) – Can be disabled/enabled via DIP
      • Door Position Switch Input: DRY Contact, normally-opened (NO) – Can be disabled/enabled via DIP
      • Dimensions: 6 7/10” (W) × 2” (H) × 1 7/10” (D) (174.63 mm × 51 mm × 47.63mm)
      • Material: Plastic (ABS and PC)
      • Housing: Color Black
      • Wiring Interface: JST (14-pin), 4’ cable
      • Certifications: UL/ULC 294/S319, FCC Part B
      Product Literature
      • BEA R2E-100 User Guide
      • BEA R2E-100 Cut Sheet

      Reviews

      There are no reviews yet.

      Be the first to review “BEA R2E-100 Request to Exit Security Sensor | BEA-10R2E-100”