ChrisNik 1702PM2 Pipe-Mic II

ChrisNik Pipe-Mic II 1702PM2

The PIPE-MIC II measures pipe inverts and sizes fast, easy & accurate.

Made in the USA

To use: You can direct read the depth of the invert when the pin is set at “zero offset” on the PIPE-MIC II If you need clearance under rod to measure an invert move the pin to “1′ vertical offset hole” If you need clearance under rod and a pipe that is hard to reach you can add a 1 ft. extension.(1 ft. extension sold separately) Move pin to ” 1 ‘ vertical offset w/ 1’ extension” hole.

To size a pipe: The foot is 0.33 or 4″. Take the reading from the rim, pull up and take reading plus 0.33 and that is your pipe size.