Prona MRS2 Mold Release Spray Gun – Pressure Feed

The MRS2 mold release spray guns and systems are typically used to apply oils and mold release agents in the formation of such products as; rubber, plastic, composites, wood fiber composites, panel pressing, concrete, stone veneers, and polyurethane parts.  These spray guns help keep tooling clean and production levels high for a variety of molding and other processes including laminating, extruding, filament winding, and hose manufacturing.  The MRS2 spray guns can be paired with fluid handling equipment and customized with precision regulators, dual spray guns and or automatic spray guns, longer twin hoses, air agitation, and 2 Qt., 2.5, 5, 10, 15, or 20 gallon pressure tanks.  When using water base coatings or mold release agents the use of stainless tanks over Teflon coated steel pressure tanks is recommended to prevent corrosion and rust.

Specifications:

• Air atomization pressure range (18-35 psi)
• Maximum air pressure to gun (98 psi)
• Fluid pressure range (2.5-10 psi)
• CFM requirement: (1.2-1.6 cfm)
• Fluid & air inlet fitting sizes (6mm x 4mm)
• CE and conformity with China ISO9001.2008

MODEL MRS2 Mold Release Spray Gun Features:

• Forged body and chrome plated brass hardware
• Pressure feed spray gun
• Stainless steel fluid nozzle and needle sets
• 0.3 mm, 0.5 mm & 0.8 mm nozzle sets available – sold separately
• Fluid flow adjustment at back of gun
• Weight (11 ounces)
• Fan adjustment from round ¾” to 6” fan pattern
• Package includes instructions, cleaning brush, and wrench

Information:

Prona MRS2 Mold Release Spray Gun – Part Sheet & Operating Instructions

For more detailed information on the spray gun such as parts, setup & maintenance, please review the instruction manual and part sheet.