Nucular Controller P24F Talaria MX3 / MX4 / MX5 Upgrade Kit (27kW Max Power)

Plug & Ride Kit for Talaria Sting MX3/MX4/MX5. Up to 30% more power оn standard 60V battery and up to 300% on 72V battery (for MX3/MX4). With field weakening, you will also increase your top speed by 5%.   Features include reverse gear, powerful regenerative braking, and up to 3 customizable power profiles.

Performance vs stock:
MX3: up to 8kw (stock 60V battery)
MX4 (Greenway 60V battery): Up to 12kW 
MX4 (SCUD 60V battery): up to 8kW
MX5 (Greenway 72V battery): up to 15.2kW

Upgraded 72V Battery: Up to 27kW! 

Сonnection to the standard wiring instead of the factory controller. All systems (kickstand, fall sensor, throttle, and key) will work. Headlights, brake light, and turn signals on road versions also will work. You can use the switch on the right side to set it up different power modes. The Talaria factory is replaced by the Nucular display. 

In the kit:

• Nucular controller P24F with firmware for Talaria.
• On-board computer with stem mount
• CAN-wire 120 cm (47.2 inch) for On-board computer.
• Wiring with connectors for connecting to Talaria.
• Plastic adapter for mounting with bolts.

Attention!
The firmware for a standard 60V battery is installed on the controller. If you have a more powerful battery, you need to change its settings in the Controller > Battery section and set other power modes in the Controller > Control Modes menu.

We also recommend adding the Universal thumb lever for regen (NUCTHR) to the kit.

Installation guide.