Arducam 16MP Autofocus Raspberry Pi Camera Module with ABS Case, IMX519 16 Megapixel High Resolution Autofocus Camera for All Raspberry Pi Models

Description

16MP Autofocus Camera for Raspberry Pi Arducam High-Resolutions Autofocus camera is an exclusive camera board that takes whatRaspberry Pi V1, V2, and HQ have to offer, and excels in every single aspect.It takes zero compromises in specs. With a resolution of 16 megapixels(compared to 8MP and 12MP), an autofocus lens, a V2-like form factor, andboatloads of improvements, the camera provide a better choice for a wholeworld of industrial/consumer/etc. applications, it’s compatible with anyexisting Pi models, work with the latest software from the foundation, andleverages the same tuning algorithms used in the official camera modules. Thepackage contains a camera board with an IMX519 sensor and an autofocus lens,an FPC cable, a camera enclosure that also works with the V1 and V2 boards.Notice: Please make sure you are running the latest version of Raspberry PiOS. (January 28th, 2022 or later releases, Debian version: 11 (Bullseye)).Theofficial PoE+ hat and DSI display occupy the same GPIO 0&1 as the libcameradriver, so the IMX519 AF camera cannot be used with them.Non-GPIO 0&1 controlof fan speed PoE hat and non-KMS driven touchscreen can be used simultaneouslywith IMX519 camera. Third-Party Operating Systems For now, the camera onlyworks with Raspberry Pi OS.About Octoprint: The mjpg-streamer in Octoprint hasno support for libcamera yet, if you want an AF camera for it, pls try our5MP-AF v1 camera or 8MP-AF v2 camera, as for the Arducam 16MP-AF, support forlibcamera in Octoprint is still in the works. Read more Read moreSpecification Sensor IMX519 stacked, back-illuminated sensor 16 megapixels1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534) Output RAW10/8,COMP8 Lens: Autofocus Autofocus; f/1.75; EFL: 4.28; FoV: 80°; Focus Range: 10cm ~ infinite IR cut Filter Integrated Video Modes 1080p@30fps, 720p@60fpsLinux integration V4L2 driver available Ribbon Cable Length 150mm Tripod mount1/4”-20

Features:

• 16MP for All PisThe new Raspberry Pi camera features a 16MP IMX519 sensor with a pixel resolution of 4656 x 3496, twice as high as the v2 camera and 40% higher than the HQ camera; it is compatible with any Raspberry Pi board with a MIPI/CSI interface and runs directly on the Raspberry Pi OS without much configuration.
• Autofocus Camera MoudleBuilt-in autofocus motor allows you to get focus quickly so that you can focus to infinity no matter where you place your camera. The minimum focus distance is 10cm, and the longest allowed exposure time is 200 seconds.
• Crisper Images/VideosThe 16 megapixel camera can capture 1080p Full HD video at up to 30 frames per second and 720p HD video at up to 60 frames per second, and also provides an effective 80-degree field of view.
• V1/V2 SizeThe autofocus camera module has the same size as the pi camera V2, the package comes with plastic housing, also suitable for V1 and V2 boards. And the housing also has an integrated tripod mounting hole, which you can install on any 1/4 hole distance tripod.