Abrites – AVDI – Full Key Programmer Kit

This is a kit that includes the following Abrites tools:

• ZN003
• ZN151
• ZN030
• ZN085
• ZN059
• ZN060
• ZN061
• ZN063
• ZN054
• ZN080
• ZN052
• ZN082
• CB032
• ZN040

 

ZN003:

The new generation Abrites PROTAG Programmer is the latest upgrade to our powerful key programming tool! The ZN003 contains the full functionality of the ZN002 and expands its capabilities. With the PROTAG you can perform operations with keys and transponders, used in the latest authentication systems and immobilizers.

The ZN003 is durable and ergonomically shaped to provide additional ease of usage, and is equipped with 3 slots for different types of transponders. One of the slots is specially developed for the Mercedes-Benz truck keys. The design is optimized to eliminate transponder positioning errors and maximize efficiency. PROTAG is ready to program all keys and transponders produced by Abrites, as well as a wide variety of OEM ones. It is the ultimate key programming tool for the professional locksmith.

 

ZN030:

The ABPROG programmer with Key Renewal Functionality is used to perform many of the special functions of the AVDI

• The following ICs are supported M35080xx, D080D0WQ, D160D0WQ, SPI 95xxx, I2C 24XXX, Microwire 93XXX, MCU in BCM2 of Audi A4/A5/Q5/A6/A7/A8/ VW Touareg, MCU in BCM of Renault Megane III, Scenic III, Fluence. ABPROG programmer (ZN030) including the ZN031, ZN033 and ZN046 adapters. The ABPROG programmer works with the AVDI interface only.
• This package also includes key renewal functionality.
• The ABPROG Programmer is designed to aid all AVDI users in some procedures in our other software.

 

ZN085:

ZN085 – Key Programming Tool is used for reading data from various vehicle modules with RH850 or V850 locked processors, used in a multitude of automotive brands. The Programmer is used on bench and needs to be soldered to the module, e.g. BCM, Virtual cockpit/Instrument Cluster, Handsfree Module, to connect.

NO TRACE CUTTING REQUIRED!
NO PIN LIFTING REQUIRED!

 

ZN059:

Adapter used to enter service mode for VAG VDO dashboards.

12V/1A DC Power adapter ZN063 IS REQUIRED and is not included in the package.

The ZN059 adapter is directly connected to the AVDI.

ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!

 

ZN060:

Adapter used to enter service mode for VAG Micronas dashboards with the new style connector.

12V/1A DC Power adapter ZN063 IS REQUIRED and is not included in the package.

The ZN060 adapter is directly connected to the AVDI.

ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!

 

ZN061:

Adapter used to enter service mode for VAG Micronas dashboards with the old style connector.

12V/1A DC Power adapter (ZN063) IS REQUIRED and is not included in the package

ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!

 

ZN063:

12V/1A DC Power adapter used to give power supply to the following products:

• ZN059 – VAG VDO Cluster Adapter
• ZN060 – VAG Micronas (new style connector) Cluster Adapter

 

ZN054:

• Country of Manufacture: Bulgaria
• Manufacturer: ABRITES
• Product Type: Programmer ACCOE
• Part#: ZN054
• Weight: 2.0000
• Products By Make: Audi, Volkswagen
• Compatible: Extension Cable set for Direct CAN Connection for VAG Vehicles

 

ZN052:

• Country of Manufacture: Bulgaria
• Manufacturer: ABRITES
• Product Type: Programmer ACCOE
• Part#: ZN052
• Weight: 2.0000
• Products By Make: Volkswagen
• Compatible: ABRITES ADVI Cable Set for Adapting IMMO Parts Used together with VN005 ZN052

 

ZN040:

• Country of Manufacture: Bulgaria
• Manufacturer: ABRITES
• Product Type: Programmer ACCOE
• Part#: ZN040
• Weight: 2.0000
• Products By Make: Audi
• Compatible: The Abrites A6/A7/A8 CAN Adapter is used in order to make the ALL KEYS LOST procedure for Audi A6/A7/A8 easier providing all necessary connections.

 

ZN151:

ABRITES Distribution Box Set (ZN151) is an assisting tool, designed to work with the AVDI interface and ABRITES diagnostic software for reading/writing electronic control module flashes by direct connection and boot mode. The Distribution Box is convenient for working both on the bench and in the vehicle. It can be used to connect to CAN and K-Line, as well as provide ground and power (12V – 24V) from an external power supply. ZN151 has a set of cables and pins used to connect to different modules, in order to read data, neutralize, virginise, personalize, and activate these modules. The tool also has a fuse relay incorporated, allowing fast password extraction from Mercedes-Benz vehicles.

 

ZN082:

This adapter supplies power to automotive modules when working on them on bench. It is used when programming car and truck modules from different brands, in order to keep them active. The ZN082 is used together with other ABRITES products for completing procedures successfully. The ZN082 can also be found as a part of the ZN074 ECU Reading Set.

 

CB032:

This cable is used for connection with DCM6.2 Engine Control Units in VAG vehicles.CB032 connects the ZN051 ABRITES Distribution Box when reading Component Security Data (CS) on Bench for VAG ECU DELPHI DCM6.2. The VN002 Parts adaptation license is needed to complete the procedure. The read data from the DCM6.2 ECUs is used for key programming and module replacement.