Spray Pack

TFS Label Air-Assist-Airless (AAA) 14:1 Peak™ Pump – Wall Model Set-Up (V Packing) with VIPER® AAA Spray Gun

Manufacturer: Wagner

Part Number: TFSC14WALL-VIPER-XX-XXX

Description:

AIR-ASSIST WALL MOUNT OUTFIT 1/2″ INLET 5 GAL SIPHON 

The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications. The new 14:1 Peak Performance Series pump incorporates a new completely redesigned air motor that features a stationary magnet poised for endurance and longevity. This simple direct-acting valve is also resistant to icing, has a long-life carbon fiber cylinder, and integrated noise suppression design for quiet operation. The fluid section is all stainless featuring a non-contact pump tube that never wears out. Also featured is a cartridge-style piston seal and guide for quick field replacement. The unit has a large capacity solvent cup and 360-degree fluid inlet/outlet orientation.

The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications and is 100% made in the US. 

Specifications:

• The pump offers a .33 GPM output for quick product changes with very little waste
• The New 14:1 Peak™ Performance Series pump incorporates a new completely redesigned no stall air motor that features a stationary magnet poised for endurance and longevity
• The simple direct acting valve is also resistant to icing
• Has a long life carbon fiber cylinder and integrated noise suppression design for quiet operation
• The fluid section is all stainless featuring a non-contact pump tube that never wears out
• The unit has a large capacity solvent cup and 360-degree fluid inlet/outlet orientation
• The upper seal is a V-Packing design for pre-cat lacquers, conversion varnish, and polyurethanes
• Low 6 CFM air consumption
• 25 ft. x 3/16 in. Fluid Hose
• 25 ft. x 1/4 in. Air Hose
• Stationary magnet design
• The enclosed solvent cup eliminates environmental contamination.
• Sight gauges make it easier for checking and refilling lubricant levels.
• 5 Gallon Siphon Hose

This $124.00 packing upgrade is included in our pump packages. It also has a flexible 5-gallon pick-up tube with a nylon inlet filter. Call for an optional 55-gallon pick-up tube. 

Hopper Option Available Here.

PROUDLY MADE IN USA.

Pump Operators Manual  Cut Sheet

 

Accessory & Replacement Part List:

• Wagner Fluid/Air Hose Set 2309xxx

• C.A. Technologies Repair Kit — Air Motor (Peak™ AAA) 10-163
• C.A. Technologies Repair Kit — 14-1 Fluid Section 10-117
• Inlet Strainer Screen, 3/8″ 74-560-P

Pumps are built to order and can take up to 10 days to ship.

Manufacturer: Total Finishing Supplies

Part Number: Viper

Description: The VIPER® manual spray gun uses our Mix Tech spray technology to provide you with exceptional atomization, performance, value, durability, and finish quality.  VIPER® is constructed with our aftermarket parts (Non-OEM) manufactured for the KREMLIN® Xcite® gun. The VIPER® spray gun boasts an 86% transfer efficiency. The VIPER® Mix Tech competes with other much higher-priced European Air Assisted Airless spray guns. VIPER® can be used with water-based or solvent-based coatings with fluid pressures up to 120 bar (1,740PSI).

Features:

• Material savings & environmental protection

• VIPER® is manufactured by an ISO9000 facility

• HVLP compliant

• Unsurpassed atomization and quality of spraying at almost half the price

• Lightweight and ergonomic design for outstanding performance

• Performance comparable to KREMLIN® Xcite® and uses our Non-OEM Aftermarket Standard and Ultra Fine Finish tips, seals, air cap, diffuser, fluid needle and spray gun filter screens 

Reasons to choose the TFS VIPER® over any other Air Assisted Airless (AAA) on the market:

1. You have high standards and like saving money! The VIPER® Mix Tech delivers Top tier performance at a mid-market price while offering rugged durability and superior atomization.

2. Get more done with less coating and waste! High Transfer Efficiency for Air Assisted Airless! Testing has shown this gun to have 86% transfer efficiency. 

“Why Pay for GOLD when you can save approx. 50% and go GREEN!“

Specifications

Fluid Inlet:	NPSM 1/4”
Compressed Air Connection:	NPT 1/4”
Max. Material Pressure:	120 bar (1,740 PSI)
Max. Material Temperatrue:	55°C (131°F)
Max. Air Inlet Pressure:	8 bar (116 PSI)
Operating Temperature Range:	5°–40°C (41°–104°F)
Weight:	0.6kg (1.3 lb)
Max. Sound Level:	82dB (A)

Literature

• OPERATING MANUAL

• CUT SHEET

• BROCHURE

• TIP CHART

 

Accessory Part List

• Hopper

• Non-OEM Standard Tips 134-5xx-xx4 or 134.5xx.xx4

• Non-OEM Ultra Series Fine Finish Tips 134-5xx-xx2 or 134.5xx.xx2 

• Non-OEM VX24 Air Cap 132-720-020 or 132.720.020

• Non-OEM Aftermarket Tip Sieve Support 129.609.90X

• Non-OEM Aftermarket 140 & 200 Mech Tip Sieves 129.609.90X

• 1/4″ NPT Female x #5 JIC Male

• 1/4″ M x 1/4″ F Swivel

• 3/16″ High-Pressure Fluid Line (select fittings when ordering)

• 25′ Air Line

Replacement Part List:

• 2. Wedge

• 3. Fan Regulation Set

• 4. Pressure Wedge

• 5. Fluid Needle Gasket

• 6. Fluid Needle Screw

• 7. Air Valve Complete

• 8. Needle Set*

• 9. Air Valve Spring

• 10. Needle Spring

• 11B. Back Cap

• 12. Air Inlet 1/4”

• 13. Pin

• 14. Safety Lock

• 15. Trigger Pin

• 16. Trigger

• 17. Sealing Gasket

• 18. Gun Head / Diffuser Set 

• 18-2. Sleeve Gasket / Diffuser Seal

• 23-1. Mix Nozzle Standard  

• 23-2. Air Cap Gasket, 10/pkg

• 23-3. Air Cap (Non-OEM KREMLIN® VX24)

• 24-1 Pre-Atomized Nozzle (Ultra Tips)

• 120 Bar Needle Kit, Complete

*= Included in 120 Bar Needle Kit, Complete

Pump Replacement Part List

Ref. No.	Part No.	Description
1a	52-151	Ball Valve 3/8”
1b	52-150	Ball Valve 1/4”
2	75-138	Interconnect Tube Assembly
3	52-6	Regulator Only
4	52-64	Pressure Gages Air Motor & Gun Air
5	75-146	Pump Protector Tube Assembly
6	70-170	Pump Mounting Bracket
7	74-538	Siphon Hose Assy 5 Gallon (Std) 3/8” L Vol
	74-520*	Siphon Hose Assy 5 Gallon (Opt.) 1/2” H Vol.
	74-524*	Siphon Hose Assy 55 Gallon (Opt.) 1/2” H Vol.
8	74-510	Siphon Hose Strainer 3/8” (Standard)
	74-511	Siphon Hose Strainer 1/2” (Standard)
8a	74-560	Strainer Screen
9	53-404	Fluid Hose Assembly 25ft. (YELLOW HOSE)
10	53-114-25	Air Hose Assembly 25ft. (RED HOSE)
12	70-180	Cart Assembly
13	98-0273	1/4” Extension
14	53-528	Push on Hose Elbow 1/8”BSP X 6MM”OD Hose
15	53-29	6mm Tube (6 inches per section)
16	53-527	Push on Hose Fitting 1/8”NPTM X 1/4”OD Hose
17	98-0225	Brass T-Fitting
18	98-0387	1/4” Brass Coupling
19	53-525	Push on Hose Fitting 1/4”NPTM X 3/8”OD Hose
20	53-25	3/8” Tube (12 inches per section)
21	53-520	Push on Hose Elbow 1/4”NPTM X 3/8”OD Hose

* Siphon hoses 74-520 and 74-524 require 1/2” fluid inlet (P/N 74-118)

NO DISCOUNT CODES may be applied to this item

NOTES:

KREMLIN®, AIRMIX®, and Xcite® are registered trademarks of Sames Kremlin SA or Exel Industries SA, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit KREMLIN® and Xcite® spray equipment. They are not, however, manufactured, endorsed, or sponsored by Sames Kremlin SA or Exel Industries SA or any of their affiliates, and no warranty by Sames Kremlin SA, Exel Industries SA, or any of their affiliates applies. Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Sames Kremlin SA or Exel Industries SA and is not one of their authorized distributors.

Click here to view other products, parts, & accessories!