Features
Specifications
CPU
|
1. Support for 10th Generation IntelÆ Coreô i9 processors/IntelÆ Coreô i7 processors/IntelÆ Coreô i5 processors/IntelÆ Coreô i3 processors/IntelÆ PentiumÆ processors/IntelÆ CeleronÆ processors in the LGA1200 package |
|
2. L3 cache varies with CPU |
(Please refer “CPU Support List” for more information.) | |
Chipset
|
1. IntelÆ Z490 Express Chipset |
Memory
|
1. IntelÆ Coreô i9/i7 processors: |
Support for DDR4 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2933 / 2800 / 2666 / 2400 / 2133 MHz | |
2. IntelÆ Coreô i5/i3/PentiumÆ/CeleronÆ processors: | |
Support for DDR4 2666/2400/2133 MHz | |
3. 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory | |
4. Dual channel memory architecture | |
5. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) | |
6. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
7. Support for Extreme Memory Profile (XMP) memory modules | |
(Please refer “Memory Support List” for more information.) | |
Onboard Graphics
|
Integrated Graphics Processor+IntelÆ Thunderboltô 3 Controller:
|
1. 2 x IntelÆ Thunderboltô 3 connectors (USB Type-Cô ports), supporting DisplayPort and Thunderboltô video outputs and a maximum resolution of 5120 x 2880@60 Hz with 24 bpp | |
* Because of the limited I/O resources of the PC architecture, the number of Thunderboltô devices that can be used is dependent on the number of the PCI Express devices being installed. (Refer to Chapter 1-7, “Back Panel Connectors,” for more information.) | |
* Support for DisplayPort 1.4 version, HDCP 2.3, and HDR. | |
Integrated Graphics Processor-IntelÆ HD Graphics support: | |
1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@30 Hz | |
* Support for HDMI 1.4 version and HDCP 2.3. | |
Maximum shared memory of 512 MB | |
Audio
|
1. RealtekÆ ALC1220-VB codec |
|
* The back panel line out jack supports DSD audio. |
2. Support for DTS:XÆ Ultra | |
3. High Definition Audio | |
4. 2/4/5.1/7.1-channel | |
5. Support for S/PDIF Out | |
LAN
|
1. 1 x IntelÆ 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)(LAN1) |
2. 1 x IntelÆ GbE LAN chip (1 Gbit/100 Mbit) (LAN2) | |
Wireless Communication module
|
IntelÆ Wi-Fi 6 AX201
|
1. WIFI a, b, g, n, ac with wave 2 features, ax, supporting 2.4/5 GHz Dual-Band | |
2. BLUETOOTH 5.1 | |
3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate | |
* Actual data rate may vary depending on environment and equipment. | |
Expansion Slots
|
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
|
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
2. 1 x PCI Express x16 slot, running at x8 (PCIEX8) | |
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot operates at up to x8 mode. | |
3. 1 x PCI Express x16 slot, running at x4 (PCIEX4) | |
* The PCIEX4 slot shares bandwidth with the M2P_SB connector. The PCIEX4 slot operates at up to x2 mode when a PCIe SSD is installed in the M2P_SB connector. | |
4. 1 x PCI Express x1 slot | |
(All of the PCI Express slots conform to PCI Express 3.0 standard.) | |
5. 1 x M.2 Socket 1 connector for an IntelÆ CNVi wireless module (CNVI) | |
Supports up to ASPM L1.2 power management protocols. | |
Multi-Graphics Technology
|
1. Support for NVIDIAÆ Quad-GPU SLIô and 2-Way NVIDIAÆ SLIô technologies |
|
2. Support for AMD Quad-GPU CrossFireô and 2-Way AMD CrossFireô technologies |
Storage Interface
|
1. 1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe x4/x2 SSD support) (M2A_CPU) |
2. 1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe x4/x2 SSD support) (M2M_SB) | |
3. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe x4/x2 SSD support) (M2P_SB) | |
4. 6 x SATA 6Gb/s connectors | |
5. Support for RAID 0, RAID 1, RAID 5, and RAID 10 | |
* Refer to “1-8 Internal Connectors,” for the installation notices for the PCIEX4, M.2, SATA connectors. | |
6. IntelÆ Optaneô Memory Ready | |
M.2 connectors support up to ASPM L1.2 PCIe power management protocols. | |
USB
|
Chipset+IntelÆ Thunderboltô 3 Controller:
|
1. 2 x USB Type-Cô ports on the back panel, with USB 3.2 Gen 2 support | |
Chipset: | 1. 1 x USB Type-Cô port with USB 3.2 Gen 2 support, available through the internal USB header |
2. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
3. 2 x USB 3.2 Gen 1 ports available through the internal USB header | |
4. 2 x USB 2.0/1.1 ports on the back panel | |
Chipset+USB 3.2 Gen 1 Hub: | |
1. 4 x USB 3.2 Gen 1 ports on the back panel | |
Chipset+USB 2.0 Hub: | |
1. 4 x USB 2.0/1.1 ports available through the internal USB headers | |
Internal I/O Connectors
|
1. 1 x 24-pin ATX main power connector |
2. 1 x 8-pin ATX 12V power connector | |
3. 1 x 4-pin ATX 12V power connector | |
4. 1 x PEG power connector | |
5. 1 x CPU fan header | |
6. 1 x water cooling CPU fan header | |
7. 4 x system fan headers | |
8. 2 x system fan/water cooling pump headers | |
9. 2 x addressable LED strip headers | |
10. 2 x RGB LED strip headers | |
11. 3 x M.2 Socket 3 connectors | |
12. 6 x SATA 6Gb/s connectors | |
13. 1 x front panel header | |
14. 1 x front panel audio header | |
15. 1 x USB Type-Cô header, with USB 3.2 Gen 2 support | |
16. 1 x USB 3.2 Gen 1 header | |
17. 2 x USB 2.0/1.1 headers | |
18. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) | |
19. 2 x temperature sensor headers | |
20. 1 x Clear CMOS jumper | |
21. 1 x Q-Flash Plus button | |
Back Panel Connectors
|
1. 1 x DisplayPort In port |
|
2. 2 x Thunderboltô 3 connectors (USB Type-Cô port, with USB 3.2 Gen 2 support) |
3. 1 x HDMI port | |
4. 2 x SMA antenna connectors (2T2R) | |
5. 2 x USB 3.2 Gen 2 Type-A ports (red) | |
6. 4 x USB 3.2 Gen 1 ports | |
7. 2 x USB 2.0/1.1 ports | |
8. 2 x RJ-45 ports | |
9. 1 x optical S/PDIF Out connector | |
10. 5 x audio jacks | |
I/O Controller
|
1. iTEÆ I/O Controller Chip |
H/W Monitoring
|
1. Voltage detection |
|
2. Temperature detection |
3. Fan speed detection | |
4. Water cooling flow rate detection | |
5. Overheating warning | |
6. Fan fail warning | |
7. Fan speed control | |
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. | |
BIOS
|
1. 1 x 256 Mbit flash |
2. Use of licensed AMI UEFI BIOS | |
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
Unique Features
|
1. Support for APP Center |
|
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
@BIOS | |
EasyTune | |
Fast Boot | |
Game Boost | |
ON/OFF Charge | |
RGB Fusion | |
Smart Backup | |
System Information Viewer | |
USB DAC-UP 2 | |
2. Support for Q-Flash Plus | |
3. Support for Q-Flash | |
4. Support for Xpress Install | |
Bundled Software
|
1. NortonÆ Internet Security (OEM version) |
|
2. cFosSpeed |
Operating System
|
1. Support for Windows 10 64-bit |
Form Factor
|
1. ATX Form Factor; 30.5cm x 24.4cm |
Reviews
There are no reviews yet.