LEBEN RS-28CX PREMIUM PREAMPLIFIER

CALL US NOW FOR MORE INFORMATION OR TO PLACE YOUR ORDER: 716-777-3100
(LEBEN Items are usually in stock)

WINNING HISTORY

COUNTRY	PUBLISHMENTS	NAME OF AWARD
France	Revue du Son	5-STARS (July/August, 2006)

RS-28CX is equipped with the CR type equalizer based on GE(General Electric/USA) 12AT7 authorized by the J.A.N.(Joint Army & Navy) standard of the US Army, and can reproduce a very high quality and clear sound without adding any NFB. This allows for much more stable high-frequency range, and reproduces a much higher-quality sonic experience.

WHAT IS A CR TYPE EQUALIZER?

There are two major types of RIAA phono equalization systems, one is NFB(Negative Feedback) type and the other is CR type.

A representative preamplifier equipped with an NFB type equalizer is the MARANTZ Model: 7.
This is a 3-step amplification NF equalizer based on 12AX7, which applies NFB from the 3rd stage cathode to the 1st stage cathode.(so-called “K-K type”).
The advantage of the NFB type is that it does not require a high gain level and is not very sensitive to tube quality. However, the impedance of NFB at high frequency range becomes very low and results in a negative effect – the sound becomes hard and dry.
The NFB type is usually used as it is an easier way to attain a good signal-to-noise ratio.

As for the CR type, a masterpiece preamplifier equipped with the CR type equalizer is the vintage Harman-Kardon model “Citation IV”.

CR type equalization requires a high gain level and is much more sensitive to tube quality.
Since tube quality will be directly amplified, the finest possible quality tubes are needed for this type of equalizer. Moreover, proper implementation is more difficult.
However, the CR type is far superior sonically to the NFB type, being very stable in the high frequency range. As such, it is able to reproduce a very high quality sound, especially when high quality tubes are used.

 

To avoid compromising on sound quality, one of the solutions adapted to totally protect the sensitive CR type equalizer from negative effects was to develop a separate power supply unit.
Likewise, some of the finest available high-end audio components were selected for the RS28C to keep the deflection of the RIAA curve below +/-0.3%.

Of course, the phono equalizer is only one of the strengths of the RS28C. Another notable feature is a very strong output voltage created by the Dual-Triode Tube 6CG7 of General Electric(USA) used for the line stage. Leben further selected the best quality tubes out of these and constructed a powerful SRPP type amplification which can supply power amplifiers with a maximum 80V of clean output signal.
In considering the fact that output voltage of a standard preamplifier is more or less 40V, the RS28C can output about two times as much voltage, which will drive power amplifiers with very low input sensitivity.

Likewise, for using the RS28C with a high sensitivity power amplifier, a 5-step attenuator is present in order to eliminate residual noise from speakers.

Leben also included two outputs (one fixed and one variable) in order to cope with requirements for adding a Sub-Woofer.

RS-28CX SPECIFICATIONS

TUBE COMPLIMENT	2 x 6CG7 (G.E.) 2 x 12AT7 (G.E.) 1 x 5Y3WGT
PHONO AMPLIFIER	Gain	20.2dB
RIAA Curve	Less than +-0.3dB.
Max. Input	400mV (2KHz.)
LINE AMPLIFIER	Gain	25.2dB
Max. Output	80V (Variable) & 80V(fixed)
Output Impedance	580 Ohms
Remaining Noise	0.03mV
WEIGHT	Main Body	7.0 Kg
Power Supply	6.5 Kg
DIMENSIONS	Main Body	352(W) x 240(D) x 175(H) mm
Power Supply	233(w) x 240(d) x 175(H) mm
ATTACHMENT	AC Power Cable Power Supply Connecting Cable.

Technical Specifications

“GENERAL ELECTRIC”(USA) J.A.N. STANDARD TUBE 12AT7
The Phono equalizer Circuit of CS-30EQ is of CR type RIAA equalization design with zero feedback in order to bring out the superior characteristic of the 12AT7 which is authorized by J.A.N.(Joint Army & Navy) standard.

“GENERAL ELECTRIC”(USA) HIGH OUTPUT TUBE 6CG7
The line stage circuit uses the Twin-Triode Tube 6CG7 of General Electric(USA) SRPP system, and can supply a signal of up to 80V to the Power Amplifier.
Therefore, RS-28CX can drive all kinds of Power Amplifiers of Low-Sensitivity or Low-Driving capability.

HIGH-GRADE PARTS
The highest quality available components(Condensors, Resisters, etc) are used for all essential parts which affect the sound quality. a high grade Detachable AC power cord is included.

INDEPENDENT POWER SUPPLY UNIT.
In order to shut-off any influences from the power transformer to the main circuit,the Power Supply Unit is housed in a seperate chassis.

OTHER FEATURES