Attwood Gas Spring 15″ Ext 10# #SL13-10-1

Attwood Marine SL13-10-1 Gas Springs

Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry’s most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.

The Ni-Slide series carries Attwood’s widest selection of configurations and lengths. These gas springs are the industry’s proven leader in value, quality and durability.

Gas Springs: OEM Gas Springs
Output Force: 10 Pounds
Extended: 15.00 Inches
Product Series: Ni-Slide
Compressed: 9.50 Inches
Stroke: 5.50 Inches
End Type: 10mm Socket
Shock Size: 6mm Rod x 15mm Cylinder

Specifications:

Important Notice: Gas Spring Disposal
Do not discard oil-filled Gas Springs!

It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.

Follow these instructions to remove the oil:

1. Gas Springs are under pressure. Work carefully and wear eye protection!
2. Clamp Gas Spring in a vise.
3. Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
4. Use a 1/8″ (3mm) drill bit to drill a hole 3/4″ (20mm) from bottom end of the Gas Spring. Hole must be 3/8″ (10mm) deep.
5. Drain oil by pumping the piston rod in and out several times.
6. Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.

Normalized SKU: SL13101
UPC Code:
Search Key: ATT-SL13-
Package Type: Bulk – Not packaged