Eutectic Bond-Coat 50000 Spray Powder

Proxon 50000 Bond coat produces a continuous network of tiny micro-welds that bond securely to the substrate and provide a rough, strong surface that is ideal for accepting RotoTec or Meta Ceram final coat powder alloys.

The powder particles, when introduced into the flame, undergo a vigorous chemical reaction which generates the additional energy that enhances the bonding process. Since this high energy is mostly confined to the particles themselves, only the necessary amount of heat is transmitted to the work piece, which remains relatively cool without risk of distortion or structural change.

Increased fusion reaction gives stronger metallurgical bonds.

• Part temperature during spraying should never exceed 200°C for maximum bond strength.
• Excellent deposit efficiency.
• Thermal co-efficient of expansion close to that of steel.

Coating

Spray the bonding layer of alloy 50000. This first deposit should be approximately 0,1 mm thick, obtained in a single pass. Next, the alloy is deposited.

Applications

Initial bond coat for RotoTec and MetaCeram wear resistant powders. Used to restore and protect shafts, rolls, journals, armatures, bearing surfaces, packing glands and seal areas

Base metals

Recommended for all steels (including stainless), cast iron, aluminum and aluminum alloys, nickel and nickel alloys, bronzes but not pure copper.

• Package weight: 1.5 kg
• Part Number: 50000-1.5K

Full Product Specifications

Non Stock Item – Please allow 1 week lead time