Q Acoustics Concept 50

New floor speaker from Q Acoustics .  This elegant floor speaker reproduces everything that the Concept 30, but the Concept 50 offers it even more convincingly. The sound image is more realistic and the bass reproduction has improved thanks to its low-resonance housing.

No artificial colouring

• Gelcore™ cabinet construction reduces higher frequency cabinet noise.
• P2P™ (Point to Point™) internal bracing stiffens the cabinet to minimize lower frequency vibrations.
• HPE™ (Helmholtz Pressure Equalizer™) reduces internal pressure and standing waves.
• Isolation suspension base eradicates unwanted external and internal vibrations.
• The driver assembly is mounted to the front aluminum baffle by pretensioned studs to give the correct acoustic seal, while dampening vibrations and minimizing structural coupling of the assembly in the main cabinet.
• Ground-up mid/bass and Tweeter driver design for increased power handling.
• The high-frequency driver is fully hermetically sealed and mechanically isolated (floating) from the front baffle to protect from internal resonances from the mid/bass driver.
• Crossover design is mounted on the isolation base, to minimize any microphonic pick up and away from electro-magnetic fields radiated by the drive units.

• Bass unit 2 x 125 mm
• Treble unit 1 x 25 mm
• Frequency response (-6dB) 42 Hz – 30 kHz
• Nominal impedance 6 Ω
• Minimum impedance 3.6 Ω
• Sensitivity (2.83 V @ 1 kHz) 90.5 dB/w/m
• Recommended amplifier power 25 – 150 W
• Crossover frequency 2.1 kHz
• Distortion (120 Hz – 20 kHz, @2.83 Vrms) <0.2%
• Effective volume 28.8 L
• Dimensions (H x W x D) Inc spikes and stabilizer: 1025 x 418 x 319 mm, Cabinet width: 180 mm
• Weight (per loudspeaker) 22.9 kg

• 2 x Concept 50 speakers
• 2 x Speaker grills
• 2 x Foam bungs
• 1 x Owner’s manual
• 10 x Ball-end feet
• 10 x Spike feet
• 8 x M4 Screws
• 2 x Support base