REBEC R6S

The Rebec R6S is a very compact DSP amplifier that is specifically designed to be an extension of the car’s original music system.

Due to its small size, the amplifier is easy to install in a car, for example behind the glove compartment or inside the dashboard. The amplifier is connected to the car’s existing stereo, using a separately purchased Plug & Play wiring harness.

With the Rebec R6S amplifier, you can significantly improve the sound of your car, as the amplifiers of the factory-installed instruments in cars are more or less inefficient, which is why the bass reproduction in particular suffers when the amplifier power of the factory-installed instrument runs out of power in the middle. The lack of power becomes concrete at the latest when the car is replaced with better speakers, which, for example, require more power due to lower sensitivity. The Rebec R6S solves this problem, as it contains a 4 x 65W amplifier, so the playback gets a lot more dynamics.
Sound modification is the next stumbling block with the original instrument. These instruments usually have bass and treble controls, which may not necessarily make the sound much worse. The Rebec R6S includes, for example, channel-specific time delay controls, channel-specific high and low pass filters, a channel-specific 31-band equalizer, and you can make all of these adjustments using a free app for iOS and Android phones or by connecting the amplifier to a computer.

The amplifier’s built-in Bluetooth also allows you to stream music from your phone directly to the amplifier.

Signal processor features:

• Individual time delays for six channels
• Six channel-specific low-pass filters (20Hz -20,000Hz)
• Six channel-specific high-pass filters (20Hz – 20,000Hz)
• Low pass slope: 12/18/24/30/36/42/48dB / oct.
• High pass slope: 12/18/24/30/36/42/48dB / oct.
• Delay adjustments by distance: 0 – 692cm / 1cm steps
  Delay settings in milliseconds: 0 – 20,000ms
• Six channels with channel-specific level adjustments and phase shifts 0/180°
• Six channels with 31-band equalizer per channel
• Six memory locations for adjustments
• Master Volume
• Mute

Amplifier:

• 4x65W
• Four channel Hi Level input
• Six-channel RCA outputs (4V)
• Frequency range: 10Hz – 22kHz
• Signal-to-noise ratio: 105dB
• Dimensions 170 x 108 x 47mm

Bluetooth:

• All adjustments can be made by phone
• Possibility to send music from your phone directly to the amplifier.
• Volume control via phone volume buttons or app

Available wiring harnesses:

BIG
Quadlock
MIB
Toyota ->2018
Toyota 2018->
Mercedes Benz Vito W447
Mercedes-Benz W205/W213

Download the Android app here

PC program here