Aquacorp 35 m³/Day Packaged Brackish Water Reverse Osmosis (BWRO) System
$119.99
KEY FEATURESPackaged reverse osmosis system inclusive of pre-treatment equipmentSuitable for brackish water (BWRO) applicationsIntegrated system with 8 x 4″x40″ Hydranautics membrane elements The Aquacorp Packaged Brackish Water Reverse Osmosis (BWRO) Systems are purpose built with quality components and incorporate several features to maximise performance and reliability. The AQBWRO systems are assembled in Australia and…
KEY FEATURES
- Packaged reverse osmosis system inclusive of pre-treatment equipment
- Suitable for brackish water (BWRO) applications
- Integrated system with 8 x 4″x40″ Hydranautics membrane elements
The Aquacorp Packaged Brackish Water Reverse Osmosis (BWRO) Systems are purpose built with quality components and incorporate several features to maximise performance and reliability. The AQBWRO systems are assembled in Australia and are supplied with a quality stainless steel frame as well as a vertical multi-stage centrifugal 304 stainless steel pump & PVC sch 80 pressure pipe. All systems include high performance Hydranautics membranes, 300psi fibreglass housings, PVC cluster housings & sediment cartridges for pre-filtration, flow meters & pressure gauges, Australian approved electrical box, all in-one RO controller & conductivity monitor, stainless steel needle valves and brass solenoid valves.
The Aquacorp Packaged Brackish Water Reverse Osmosis (BWRO) Systems are available in a range of sizes, ranging from 4 – 100 m³/Day, nominal permeate flow rates.
ADDITIONAL FEATURES
- Assembled into integrated stainless steel frame
- High quality equipment, piping and Hydranautics membranes
- Incorporates pre-treatment filtration
- Australian approved electrical box, as provided by supplier
APPLICATIONS
- Suitable for a range of brackish water treatment (BWRO) related applications.
PRODUCT PACKAGE INCLUDES
- Aquacorp 35 m³/Day Packaged Brackish Water Reverse Osmosis (BWRO) System
- Inclusive of membranes and fibreglass housings (x8), pump, instrumentation and controllers and stainless steel frame. For specific inclusions, refer to the AQBWRO Product Brochure.
SPECIFICATIONS
The performance of the AQBWRO system is dependent on and highly sensitive to feed water quality and may require appropriate pre-treatment to remove or reduce deleterious components including, but not limited to turbidity, SDI and chlorine, before feed water enters the RO system.
In order to assist in determining the ideal RO system size, type, configuration, including any potential pre-treatment requirements, reach out to Parkway Process Solutions, to explore a range of fit-for-purpose options.
| Brand | Aquacorp |
| Model | AQU-AQBWRO-35 |
| Weight | 260 kg |
| Length | 1,800 mm |
| Width | 1,100 mm |
| Depth | 1,970 mm |
| Power Supply | 415 V AC, 50 Hz, 3-phase |
| RO System Type | Brackish Water |
| Processing Stages | 3 stages |
| Membrane Modules | 8 modules |
| Membrane Model | Hydranautics, CPA5 LD 4040 (4″ x 40″) |
| Membrane Housing Type | 4”x40” 300psi Fiberglass Housing |
| Indicative Rejection Rate | 95 – 98% ion rejection |
| Nominal Flow Rate | 35 m³/Day (based on 25 °C, 2,000 mg/L TDS, test conditions) |
| 1,450 L/h permeate production, at recommended flux | |
| 1,895 L/h permeate production, at maximum flux | |
| Operating Pressure | 900 – 1,200 kPa (130 – 170 psi) |
| Operating Temperature | 45 °C max |
| Pre-Treatment Filter | 2 x PVC 5-Round 30” Cluster Housings |
| Feed Water Requirements | |
| Feed Water Type | Brackish water |
| Inlet Pressure – min | 280 kPa |
| Inlet Pressure – max | 500 kPa |
| pH Range | 2 – 10 |
| Feedwater – Turbidity | 1.0 NTU (max) |
| Feedwater – SDI | 5.0 (15 mins) |
| Inlet TDS – max | < 5,000 mg/L (to be confirmed by feed water testing) |
| Chlorine – max | < 0.1 mg/L (max) |
| Additional Details | Refer to the Product Data Sheet |
The contents of this document are provided as a guide only and are subject to change without prior notice, and without any subsequent liability to Parkway Process Solutions Pty Ltd (the “Company”) or any of its related entities. The actual shape, colour, size, performance and/or any other parameters of the item/s and/or product/s and/or system/s supplied by the Company, may vary materially from those outlined by the Company.
All brand names and product names outlined in this document are either trademarks or registered trademarks and belong to the respective companies.
ALL INFORMATION OUTLINED HEREIN IS PROVIDED AS A GUIDE ONLY AND SHOULD NOT BE RELIED UPON FOR ANY PURPOSE, WITHOUT CONFIRMING SUCH DETAILS WITH THE COMPANY BEFORE MAKING A PURCHASE AND/OR UTILISING A GIVEN PRODUCT.
ADDITIONAL RESOURCES
PRODUCT BROCHURE – RO SYSTEM
Additional information about the Aquacorp 35 m³/Day Packaged Brackish Water Reverse Osmosis (BWRO) System is outlined in the product brochure.
DOWNLOAD
PRODUCT BROCHURE – RO MEMBRANES
Additional information about the Hydranautics CPA5-LD-4040 membrane modules included in the Aquacorp Packaged Brackish Water Reverse Osmosis (BWRO) Systems is outlined in the product brochure.
DOWNLOAD
USER MANUAL – RO SYSTEM
Additional information about operating the Aquacorp Packaged Brackish Water Reverse Osmosis (BWRO) System is outlined in the, instruction manual.
DOWNLOAD
Reviews
There are no reviews yet.