DH101007100 Duraline Hi-A/T Saw Blade, 10″ x 100 Tooth

Slice through the thin bottom layers of melamine or plywoods easily with one of Forrest’s Duraline Hi-A/T saw blades. The 40 degree points of these blades slice through those layers with no tears or chips. They are recommended for thin stock, low pressure, two-sided laminates, plywoods, and fine cross cutting on all woods. These blades are especially nice for thin veneers on flake board MDF, laminated pieces, Masonite, and hard board. This blade is 10” in diameter, has 100 teeth, a 0.100” kerf, and 5/8” bore.

If you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. 10% restock fee will apply and customer pays return shipping

If purchased at a Woodcraft Store, please return directly to the store where the purchase was made.

Blades will perform to customer’s full satisfaction or may be returned within 30 days in good condition for full credit. Guarantee does not apply to blades used on other than Forrest approved operations. If high quality local sharpening is not available, Forrest recommends returning your blades to Forrest to be sharpened to maintain ideal sharpness and tooth geometry. Failure to maintain proper sharpness and geometry may void guarantee and inhibit blade’s performance. Other than stated in this guarantee, Forrest Manufacturing Company makes no other warranties concerning products shipped, either express or implied.