Fluke 754 Documenting Process Calibrator-HART
$119.99
Whether you’re calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does many different tasks quickly and it’s the only process calibrator you need to carry. This rugged, reliable, integrated communicating calibrator is ideal for…
Whether you’re calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does many different tasks quickly and it’s the only process calibrator you need to carry. This rugged, reliable, integrated communicating calibrator is ideal for calibrating, maintaining, and troubleshooting HART smart transmitters and other instrumentation.
Contents Included:
What’s in the box:
- Fluke 754 Documenting Process Calibrator-HART
- BC7240 battery charger
- Li-on BP7240 battery pack
- NIST-traceable calibration report and data
- (3 sets)TP220 test probes
- (3 sets) “extended tooth” alligator clips
- (2 sets) AC280 hook clips
- C799 Soft Field Case
- USB communication cable, Fluke 754HHC HART communications cable
- Quick Reference Guide
| Mechanical and General Specifications | |
| Size | 136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in) |
| Weight | 1.2 kg (2.7 lb) |
| Batteries | Internal Battery Pack Li-ion: 7.2V,4400mAh, 30 Wh |
| Battery life | >8 hours typical |
| Battery replacement | Replace without opening calibrator; no tools required |
| Side port connections | Pressure module connector |
| USB Connector to interface to your PC | |
| Digital instrument (HART) connector | |
| Connection for optional battery charger/eliminator | |
| Data storage capacity | 1 week of calibration procedures results |
| Technical Data | ||
| Data log functions | Measure functions | Voltage, current, resistance, frequency, temperature, pressure |
| Reading rate | 1, 2, 5, 10, 20, 30, or 60 readings/minute | |
| Maximum record length | 8000 readings (7980 for 30 or 60 readings/minute) | |
| Ramp functions | Source functions | Voltage, current, resistance, frequency, temperature |
| Rate | 4 steps/second | |
| Trip detect | Continuity or voltage (continuity detection not available when sourcing current) | |
| Loop power function | Voltage | Selectable, 26 V |
| Accuracy | 10%, 18 V minimum at 22 mA | |
| Maximum current | 25 mA, short circuit protected | |
| Maximum input voltage | 50 V DC | |
| Step functions | Source functions | Voltage, current, resistance, frequency, temperature |
| Manual step | Selectable step, change with arrow buttons | |
| Autostep | Fully programmable for function, start delay, stepvalue, time per step, repeat |
Be the first to review “Fluke 754 Documenting Process Calibrator-HART”
Related products
Reviews
There are no reviews yet.