Foredom K.2245 LX Series Flex Shaft Machine Deluxe Stone Setting Kit – 110 Volts

Foredom K.2245 LX Series Flex Shaft Machine Deluxe Stone Setting Kit – 110 Volts

This professional kit by Foredom™ is ideal for stone setting and other precision tasks. The high-torque, low-speed motor offers the user more control. The handpieces are specifically designed for rapid bur changes; therefore improves productivity. 110 volts; 1.2 amps. Includes a two-year limited manufacturer’s warranty on the motor and foot control only.

Components:

• Series LX Motor: These permanent magnetic motors are specifically designed for high-torque and low-speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. The M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 RPM. Ideal for use with Foredoms drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting (sold separately). It comes equipped with a motor bale for hanging, and our standard 39″ long key-tip shafting for connecting to any of Foredoms interchangeable, quick disconnect handpieces.

• C.TXR Speed Control: This slip-resistant control also has a different style plug that is made to fit the motor’s shielded-type plug. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. Measures: 7-1/4″ long x 4-1/2″ wide x 2-1/2″ high.

• H.18 Quick Change Handpiece: For use with only 2.35 mm (3/32″) shank burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication. Measures: 7″ long x 19/32″ in diameter.

• H.15 Hammer Handpiece: Designed with a hammering rather than rotary action for use at low speed (0 – 5,000 RPM) by jewelers for stone, prong, and bezel setting, plus decorative and pave texturing work. Comes with HP10177 Anvil Point. It requires periodic lubrication. Hammer has 1/32″ stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Measures: 6-1/4″ long x 1/4″ in diameter at the tip.

• AK90 Accessory Kit: A 13-piece assortment of step drills and steel engraving burs in small round bur holder. Also includes one tube of flexible shaft grease. • High-torque, low-speed Foredom™ Series LX, DC permanent magnet 1/10hp motor achieves speeds up to 5,000rpm. • Slim, comfortable H.18 quick-change handpiece with permanently lubricated ball bearings and a 3/32″ (2.3mm) collet. • Adjustable-impact, 1/32″-stroke H.15 hammer handpiece with an anvil point for prong-, channel- and bezel-setting; a diamond point for pavé texturing; and a carbide stylus for texturing. • Slip-resistant Foredom TXR variable-speed electronic foot control. • Flexible shaft with quick-detach feature that accepts any Foredom handpiece except H.30H and H.44HT. • 13-piece accessory kit for stone-setters, which includes 12 Swiss-made burs in a plastic stand with cover.

WARNING: This product can expose you to chemicals including acrylonitrile, beryllium , carbon-black extracts, lead, nickel, which are known to the State of California to cause cancer, birth defects or other reproductive harm (www.P65warnings.ca.gov).