Senquip 4G RS485 Sensor Gateway & Datalogger – IC-ORB-X1-G
$20.99
The ORB-X1 has sensors to allow the measurement of voltage, current, position, speed, tilt, temperature, pressure, frequency, and serial data. Users can connect almost any industrial sensor to the ORB-X1. Data measured by the ORB-X1 is transmitted via WiFi or GSM and can be delivered to the…
SKU: GVO37545129
Category: Senquip
The ORB-X1 has sensors to allow the measurement of voltage, current, position, speed, tilt, temperature, pressure, frequency, and serial data. Users can connect almost any industrial sensor to the ORB-X1.
Data measured by the ORB-X1 is transmitted via WiFi or GSM and can be delivered to the Senquip Portal or to your own server. Flexible measurement timing makes the ORB-X1 a low power device that can be operated off replaceable batteries, solar or permanent power.
Features:
– Multi-sensors: Measure voltage, current, position, speed, tilt, temperature, pressure, frequency, serial data and more.
– WIFI and GSM: CAT-M1 GSM ensures best possible coverage and least possible power. WiFi connectivity allows for connection to local networks.
– Multiple protocols: SMS, UDP, MQTT, TCP and more.
– Secure data: Embedded certificates and secure communications.
– Notifications: Configurable levels for each notification
– Adaptable: Users write their own scripts.
– Versatile mounting: Ships with pole and wall mount options.
– Built tough: Designed for use in harsh industrial environments.
– Simple setup: Use any phone, tablet, or laptop with the integrated web server.
– Cloud services: Access to the Senquip Portal for viewing of data, storage, remote setup and firmware upgrades
– Integrated light sensor – Used to activate the ORB setup functions when the lid is opened and to detect tamper attempts. The light sensor is sampled on a regular basis and does not have an associated measurement interval.
Internal sensor specifications
Accelerometer:
– G-force range: +/- 16G
– Resolution: 1mG
– Sensitivity change vs temperature: 0.1% per C
– Typical zero-g level offset accuracy: +/- 40mG
– Tilt resolution: 0.1 deg
– Tilt accuracy (0-45 deg): 1.0 deg
– Tilt accuracy (45-90 deg): 2.0 deg
Pressure Sensor:
– Pressure range: 300 – 1100 hPa
– Temperature range: -40 to 85 C
– Absolute accuracy (0 to 65 deg C): +/-1 hPa
– Relative accuracy (25 to 40 deg C): +/-0.12 hPa, equivalent to +-1 m altitude
– Absolute maximum pressure: 20,000 hPa
Temperature sensor:
– Measurement range: -40 to 85 C
– Resolution: 0.01 deg C
– Absolute accuracy (25 C): +/-0.5 deg C
– Absolute accuracy (0 – 65 C): +/-1 deg C
GPS:
– Time to first fix from power up: Typically 60 seconds
– Position update rate: Maximum 1Hz
– Horizontal position accuracy: Typically +-5m
– Vertical position accuracy: Typically +-20m
– Horizontal speed accuracy: 1km/h
External sensor specifications:
Current Source 1 and 2:
– Maximum source current: 100mA per pin
– Current measurement accuracy (20mA range): +/-0.1mA
– Current measurement accuracy (100mA range): +/-1mA
– Maximum voltage on pins: 12V
– Voltage measurement accuracy: +/-300mV
Thermocouple:
– Temperature accuracy: +/- 0.5 C (typical)
– Temperature accuracy: +/- 1.5 C (0 to 85 C)
– Resolution: +/- 0.0625 C
– Hot junction accuracy: +/- 0.25 C (typical)
– Hot junction accuracy: +/- 0.5 C (0 to 85 C)
– Cold junction accuracy: +/- 0.5 C (typical)
– Cold junction accuracy: +/- 1.0 C (0 to 85 C)
Output:
– Maximum open circuit voltage: 72V
– Maximum hold current: 450mA min
– Minimum fuse current: 550mA max
Serial Interface:
– RS232 transmitter output low voltage (typical): -5.5V
– RS232 transmitter output high voltage (typical): +5.9V
– RS232 Input threshold voltage: +1.5V
– RS485 differential output voltage (minimum with load resistance 120?): +2V
– RS485 differential input signal threshold: +/-220 mV
– Maximum nodes in RS485 mode: 256
– RS485 termination resistor: 120 ohms
Warranty
– 1 Year Manufacturer Warranty + Additional 1 Year Instrument Choice Warranty
Reviews
There are no reviews yet.