Everest Refrigeration EPBR1 27.75 Inch One Section Back Mount Mega-Top Sandwich Prep Table 8 Cubic Feet

The Everest Refrigeration EPBR1 is an Sandwich Prep Table with a Back Mounted Condensing Unit. The worktop on this refrigerator is constructed of 16 gauge stainless steel, while the interior and sides are also made of stainless steel. The rear and bottom are constructed of galvanized steel. The Blizzard R290 condensing unit is replaceable, doesn’t require on-site brazing and features reverse fan motors which support condenser coil cleaning. The EPBR1 utilizes environmentally friendly refrigerant R290.

The defrost cycle is both time-initiated and temperature terminated, and uses a defrost heater. This product’s evaporator coils are corrosion resistant. The condensate drain is self-maintaining, and will not require any external drains. In addition, the drain is energy efficient, it won’t need any electric heaters either. Pressure relief devices allow for easy access to the interior after opening the door. The factory preset temperature is 35°F. Temperatures can range from 33°F to 54°F.

The door gasket is snap-in and magnetic. The high strength door handles are recessed. There are four 5″ swivel casters, with locks on the front set. The self-closing adjustable torsion system offers a positive seal. Meanwhile, the interior features one epoxy-coated steel wire shelf. The cabinet and door are insulated with high-density polyurethane. The included NEMA 5-15P is pre-wired and ready to plug.

Everest Refrigeration EPBR1 Features

• 1 Self-Closing Solid Hinged Door
• Mega-Top
• Back Mounted Condensing Unit
• Refrigerant: R290
• Capacity: 8 Cubic Feet
• Blizzard All-In-One Slide Out Cooling Cartridge
• Top, Sides, and Interior Material: Stainless Steel (16 Gauge Worktop)
• Bottom and Rear Material: Galvanized Steel
• Multi-Function Digital Controller
• 2-1/2″ Polyurethane Insulated Cabinet
• (4) 5″ Swivel Casters with Locks on front set
• High Performance Condenser Fans
• Foam Insulated Lid
• Removable Cutting Board
• Frame Heaters
• Rounded Corners
• Electronically Commutated (ECM) Fan Motors
• Full-Length Air Duct System
• Overheat Protection Alarm
• Temperature Range: 33°F to 54°F
• NEMA 5-15P
• NSF Listed
• ETL
• Electric: 115v/60/1ph

Everest Refrigeration EPBR1 Benefits

• Plug is pre-wired and ready for use
• Frame heaters prevent moisture buildup on exterior
• Slide out cooling cartridge is quick, safe, and eliminates the risk of coolant ignition
• Digital controller features an easy to read LED display
• ECM motors achieve rapid cooling with less consumption
• Rounded corners reduce hazards

Overall Dimensions:
Height: 38-1/2″
Width: 27-3/4″
Depth: 35-1/4″

NSF Listed

This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

ETL Sanitation

This item meets all sanitation standards imposed by the ETL, a division of the Intertek Group.

5-15P

This unit comes with a NEMA 5-15P plug.

Proposition 65

Warning: This product contains chemicals, including lead, that have been identified by the State of California as causing cancer and birth defects or other reproductive harm. For further details, please visit http://www.p65warnings.ca.gov.