Blower Hyperspin. 4.5 HP, 3 phases

Regenerative air blowers for aquaculture and water treatments designed and manufactured based on principles of reliability, efficiency and quality. Thanks to its construction, the impellers are connected directly to the motor shaft and the bearings are located outside the compression chamber. Their manufacture made from cast aluminum makes them much lighter, producing, in turn, less noise.

• Model: HSB-4.5HP-A295; CFM at 50″ depth: 159.0;
• M3/HR at 1.27 M depth: 270.0;
• Maximum continuous operating depth: 2.3m;
• Maximum CFM at continuous operating depth: 126.6;
• Maximum m3/hr at continuous operating depth: 215.0;
• Power: 4.5;
• Phase 3;
• Voltage: 230 – 460;
• HZ: 60.

Blower Hyperspin
4.5 HP