Creda TPRIII0100E 091277 Electric Wall Mounted Panel Heater with Programmable Timer 1.0kW

Panel Heater

_Modern and efficient electric panel heater with Programmable room temperatures and heating time periods. Neutral white colour; gentle curvature and slotted grille; this heater will fit naturally into any room.. Features the CapSense controller; providing a more intuitive user experience with its backlit LCD display and touch-sensitive buttons
_Adaptive Start pre-heats the room ahead of a programmed heating schedule for only exactly the amount of time required to meet the desired target temperature at the desired time. For example; if the product was following a timer which was set to 21 degrees at 7am; with Adaptive Start the product will begin heating before 7am to achieve 21 degrees at 7am; without Adaptive Start the heater will only begin heating at 7am
_Open Window detection monitors the room temperature while the heater attempts to achieve a desired room temperature. If the room temperature does not change or decreases while heat is being emitted; the product will stop heating and enter a standby mode in order to not waste energy.. This panel heater is also splash-proof for use in bathrooms (outwith zone 2) and complies with Lot 20 of ERP Directive. Matching other models of this heater are available
_Designed for permanent connection to a 13 amp spur connection unit, so no plug is fitted to this heater. You can fit a standard 13 amp plug if required (5 amp fuse). 1.3m flex (leaves heater on bottom right hand side). IP24 rated. BEAB and CE approved. Class I – earth connection required. Auto re-set overheat safety cut-out
_Dimensions: 620mm wide x 430mm tall x 108mm deep. Minimum 150mm clearance required on both sides, top and bottom. For wall mounting only