DORMAKABA® Top Door Patch Fitting with Pivot Insert For 3/4″ Glass

DORMAKABA Top Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the glass panel, and requires a hole and cut-out in the glass. Available in brushed and polished stainless steel finishes. 

The following guidelines are to be used when making a door using this hardware:

Maximum Height: 102″ (2.59 m)
Maximum Weight: 194 lbs. (88 kg)
Maximum Width: 42″ (1.09 m)

If the door exceeds any limitations, full door rails should be used. 

GLASS FABRICATION REQUIRED:
One 3/4″ (19 mm) Diameter
Hole and Corner Notch

For 3/4″ (19 mm) Glass | Use Monolithic Tempered Glass | 304 Alloy Stainless Steel Covers | 2-3/4″ (70 mm) Pivot Setback.