SP-160X01T Pump with 4″ cable for Birdbath, 2-Tier, Aquanura *Threaded Plug (Replaced by GPA4T)

• If your old pump is model# SP-160X01T (ends with T) then you can order this pump without needing a plug adapter.

• Examples of solar panel model numbers that have the new threaded-style plug:
  SF0W6ST, SB1W1ST, SB1W5ST, SB1W5DT, SB2W0DT
  If your solar panel is one of these numbers then no you do not need a plug adapter.
  ———————————————————————————–
  
• If your old pump is model# SP-160X01 (does not end with T) then you have an older version which has a discontinued plug style. When you order new pump model# SP-160X01T you will also need to order a plug adapter which is part# PA-10 to be able to connect it to your solar panel which would have an older version of the plug. The plug adapter goes in between the plugs and lets you connect a new pump with a threaded style plug to an old panel with a push together style plug.

• Examples of solar panel model numbers that have the discontinued push-together style plug:
  SF0W6S, SB1W1S, SB1W5S, SB1W5D, SB2W0D
  If your solar panel is one of these numbers then yes you will need a plug adapter PA-10 to be able to connect this new pump.

• If you already have a plug adapter from a previous order then you can order just the pump.
  ———————————————————————————–

• The other option is ordering both a new pump and new panel in a kit.
  Here are options for kits:
  Kits For Birdbaths
  2060PKS-T (standard solar with panel and pump) for square reservoir
  2060PKM-T (standard solar with panel, pump, mounting ring) for round reservoir)
  2060PKD-T (solar-on-demand with panel, pump, battery, 2-tier tube kit)
  Kits For 2-Tier Fountains
  2090PKS-T (standard solar with panel, pump, 2-tier tubes)
  2090PKD-T (solar-on-demand with panel, pump, battery, 2-tier tube kit)
  

PUMP SPECS:

• Internally brushless motor with 4 inch (10cm, 0.1m) cable
• 4 to 12 volts max, 3.5 watts max, liquid temp 35°C (95°F) max, IP68
• Has a threaded style plug
• Comes with impeller, cover, and filter (on the inside)
• Requires either a solar panel or AC adapter to operate
• For use in these solar fountains with integrated style solar panels: Birdbaths, 2-Tiers, Umbrella Fountain with Boy & Girl (statues may vary), Urns, Buddha, Lily Pad, Aquanura (panel is located in the fountain under water, instead of out of the fountain on the ground)
• Replaces pump model
• When replacing older model pumps that had a different plug style such as the following model numbers then you will need also need to order a new solar panel based on your fountain:
  SP-120X01 (for Angel or St. Francis), SP-160X01 (for birdbaths), SP-160X02, SP-160XC3 (for fountains with 2 solar panels), SP-160X12 (for fountains with 2 solar panels), 20020P01, 20620P01, 20900P01, 20960P01, 20020ELCB, 20020ELCL, 24400P01
• Note: When replacing pump #SP160X12T if you want the pump and splitter you can order item# SPK160X12T it will come with both.
  

SHIPPING:

• This item ships via US Postal Service. See exceptions:
  If ordering multiple replacement parts and the total weight is over 1 lb then the order may ship via Fed Ex.
  If combined with a replacement part that ships via Fed Ex then the whole order will ship via Fed Ex.
  If you order a replacement part and a full product they ship from different warehouses so they will ship separately.