Ikedo Mini Sumo Robot Pro Kit

• Ikedo Mini Sumo Robot Pro Kit
• Features one of the most powerful fighting machine
• Is equipped with a pair of super powerful micro size metal geared DC motor (800 RPM)
• Includes high friction silicone wheels
• Uses ATMEGA 328 powered controller (Arduino Uno compatible)
• Has built-in 6 Amp peak H-bridge motor driver and several ports for sensors

The Ikedo Mini Sumo Robot Pro Kit is all in one fighting machine. This is a pro version construction kit that comes with all higher spec parts to enhance the performance so the price is not the concern during our design. The Ikedo Mini Sumo Robot Pro is the most powerful fighting machine that designed to knock down the opponent in seconds!

It is equipped with a pair of super powerful micro size metal geared DC motor (800 RPM), the high friction silicone wheels, 5 X opponents sensors to cover 180º spectrum, a high-density copper base mounted underneath to increase the robot weight and many more.

Last but not least, the highlights of the main controller of the robot – Maker Mini Sumo. This 9.1cm x 3.5cm controller is powered by ATMEGA 328 (Arduino Uno compatible), built-in with 6 Amp peak H-bridge motor driver and several ports for sensors. You do not need any external circuit boards with messy jumper wires to make your robot works.

• 1 x Maker Mini Sumo Controller
• 5 x Maker Object Sensor (opponent)
• 2 x Maker Reflectance Sensor (edge)
• 2 x 800RPM 6V DC Micro Metal Gearmotor
• 1 x 3D Printed Motor Bracket
• 2 x Sumozade Silicone Wheel 30 x 23 mm
• 1 x 7.4 V 450 mAh LiPo Battery
• 1 x Mini Sumo Robot Chassis (Main)
• 1 x Laser-Cut Stainless Steel Shield
• 1 x 4′ Stainless Steel Razor Blade
• 1 x Copper Base Weight Base
• 1 x JST LiPo Battery Wire Extension
• 1 x 2561 3Ways Connector Extension Wire
• 8 x M3x6 Self Tapping Screw (Black)
• 4 x M3x18 Bolt for Motor Bracket
• 4 x M3 Nut for Motor Bracket
• 1 x Philip Screwdriver

Size

• 9.1 x 3.5 cm

PDF File

• Ikedo Mini Sumo Robot Pro Kit – Datasheet

• Chassis color: black
• Chassis material: PLA (3D printed)
• Battery: 7.4 V 450 mAh LiPo rechargeable battery
• Arduino Nano/Uno compatible (Powered by ATmega328P)
• CH340C based USB to serial converter
• Auto and manual control mode (RC transmitter and receiver sold separately)
• On-board start button and port for external start module (Not included)
• LED status indicator for power, motor, opponent sensors and start button
• Programmable LED, 3-ways DIP switch, potentiometer and piezo buzzer
• Port for RC servo
• Arduino IDE compatible
• Weight: 350 gram