17kW – 24kW Generac Generator Wire Aluminum) Part#17AL

STARTING AT $114.30 THE PRICE PER FOOT DECREASES AS LENGTH INCREASES. CHOOSE LENGTH TO SEE YOUR TOTAL SHIPPED PRICE

 Max length of 115′ recommended

**This Multi Conductor Cable includes the following stranded Aluminum conductors: Three #1AWG – One #6AWG – Nine Copper #18AWG

**This is an all-inclusive cable that includes all conductors necessary to connect your generator to the transfer switch. We recommend you measure the linear distance between the generator and transfer switch. The exact path the wire will be installed. Add 5′ in length for connections within the generator and transfer switch.

**Not all jurisdictions consider aluminum conductors an acceptable wiring method. Please confirm with your Authority Having Jurisdiction prior to purchasing this cable.

**Many jurisdictions across the United States have their own rules, standards and interpretation of the NEC. You are responsible to confirm acceptance by your Authority Having Jurisdiction. See the spec sheet to provide them for approval. There are no returns or refunds once your order has been processed and the wire has been cut.

SALE OF CUT WIRE IS FINAL AND NO RETURNS WILL BE ACCEPTED

250′ ORDERS NORMALLY TAKE 7-10 DAYS TO LEAVE FACTORY – THIS IS NO GUARANTEE – WE ARE UNABLE TO PROVIDE TRACKING OR CHECK LEAD TIMES ON 250′ ORDERS

Ziller Electric does not endorse this wire being used with a 26kW air cooled generator

Generator 17kW – 24kW Generac Aluminum Generator Wire /  Technical Specs:

Click Here To See Spec Sheet

Wire Outer Diameter = 1.13″

Wire Jacket Print Legend
(UL) E60544 POWER AND CONTROL TRAY CABLE TYPE TC-ER-JP 1 AWG AL (42,4 mm2) 3/C + 6 AWG AL (13,3
mm2) 1/C GROUND THWN CONDS & 18 AWG (0,82 mm2) 6/C TFFN CONDS 600V 75C DRY/75C WET OIL RES I
SUNLIGHT RESISTANCE DIRECT BURIAL JOIST PULL GENERAC P/N AL1622 “sequential footage print”

 

Components

A: (3) – #1 AWG Class B stranded, 8000 series, aluminum conductors w/50 mils (1.27 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 7 mils (0.18 mm) nylon applied directly to the surface of the insulation.

B: (9) – #18 AWG Class K stranded, soft drawn, bare copper conductors w/15 mils (0.38 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 4 mils (0.10 mm) nylon applied directly to the surface of the insulation.

C: (1) – #6 AWG Class B stranded, 8000 series, aluminum conductor w/30 mils (0.76 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 5 mils (0.13 mm) nylon applied directly to the surface of the insulation

D: Mylar binder tape.

E: 80 mils (2.03 mm) of heat and moisture resistant, polyvinyl chloride (PVC) jacket.

The 2017 NEC, allows this wire to be installed without a conduit or flexible raceway unless subject to physical damage. Consult with your authority having jurisdiction prior to installation.

Associated to Generator Models: 7226, 7228, 7038, 7039, 7042, 7043, 7209, 7210