Tenda O2 Point to Point Outdoor CPE: 5GHz, 300Mbps, 2-Kilometers+

Description

Tenda O2 Point to Point Outdoor CPE is designed to enable long-distance wireless network solutions for video surveillance and data transmission. It features with 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. It features auto-bridging technology, which allows two CPE’s to connect to each other automatically for an easier set-up.

Features

• 2 Kilometers+ Transmission Range
• 5GHz Frequency Range
• 300Mbps Maximum Wireless Rate
• 12dbi Antennas Gain
• IP65 Waterproof Level
• 12V1A Passive PoE Power Method
• 6000V Lightning Protection
• Long-Distance Wireless Connection and WISP (Client + Router) Mode

More Info

Tenda O2 Point to Point Outdoor CPE

2km+ Transmission Range O2 utilizes an independent power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 2km.

Super Channel-Extended Frequency O2 utilizes a Qualcomm AR9344 chipset and special software mechanism optimization for radio driven architecture to offer extended frequency support. This feature is designed to help users get out of the congested, unlicensed 5GHz band and into a clean spectrum.

TD-MAX-Tenda TDMA Proprietary Protocol TD-MAX is Tenda TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless WISP outdoor application scenarios. In outdoor environments, the CPE uses highly directional antennas to connect to the Base Station from distances that can span several kilometres. When the CPE can’t sense each other, they become “hidden nodes” and cannot coordinate access to the wireless channel. Thus the Base Station experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput. With TD-MAX, it coordinates all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocols.

10/20/30/40MHz Channel Bandwidth for Better Throughput O2 utilizes special optimization in its software when registering parameters to deliver a 10/20/30/40MHz channel bandwidth option. It provides an extra 10MHz and 30MHz channel bandwidth options to be consumed depending on application scenarios. When you choose the 30MHz channel bandwidth option, it can increase throughput for noisy environments. When you choose the 10MHz channel bandwidth option, it can increase the number of available, non-overlapping channels, so networks can scale better.

Channel Shift to Avoid Interference O2 provides a Channel Shift feature to offset the central frequency 5MHz upper. It can avoid interference from nearby AP and deliver higher throughput.

Multiple Application Scenarios

Long-Distance Wireless Connection One work as AP mode and another work as Station mode to create a long-distance wireless connection for video surveillance and data transmission.

WISP(Client+Router) Mode Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network.

Tech Specs

Tenda O2 Point to Point Outdoor CPE

Product Information
Model	O2
Dimensions(L*W*H)	193.5*80*67.5mm
Deployment	Pole Mount/Wall Mount
Application Scenarios	PtP and PtMP wireless connection for Private ISP access or CCTV Surveillance
Hardware
Frequency Range	5GHz
Compliant Standards	IEEE 802.11a/n
Maximum Wireless Rate	300Mbps
Interfaces	1*10/100Mbps Ethernet Port
Antenna	Dual Polarization
Antennas Gain	12dbi
Antenna Beamwidth	Horizontal: 30° Vertical: 30°
GND	/
Reset Button	1*Reset Button
Power Consumption	4.3W
Waterproof Level	IP65
LED indicator	PoE/LAN,WiFi, LED1,LED2,LED3
Power Method	12V1A Passive PoE
	12V1A DC
Lightning Protection	6000V
Passive PoE	Passive power over ethernet via PoE/LAN (+4,5pins
	-7,8pins)
	Voltage range: 9-13.8V DC
Receiver sensitivity	11a 6Mbps -96dBm±1.5dBm
	11n MCS0: -96±1.5dBm
	11n MCS7: -72±1.5dBm
Software
TDMA	Support
Operating mode	AP/Station/WISP/P2MP/WDS Repeater/Router
Enable/Disable Wireless Radio	Support
SSID Hidden	Support
Wireless Client isolation	Support
SSID Isolation	Support
Channel Bandwidth	10/20/30/40MHz
Channel Shift	Support
Wireless Access Control	Support
Weak Signal Client Limitation	Support
Transmission Power	Adjustable power by 1dBm
WMM Capable	Support
APSD Capable	Support
Wireless Security	64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transparent Bridge	Support
VLAN Tagging for SSID	Support
DHCP Server	Support
VPN Pass-Through	PPTP, L2TP
Remote Web access	Support
Scheduled Reboot	Support
Page Timeout	Support
Ping Watchdog	Support
Dyndns	noip, dyndns.org
Network Diagnoses	Ping, Traceroute, Signal Scan
Time&Date Setting	Support
Firmware upgrade	Support
Backup/Restore Configuration	Support
Username Management	Support
System Log	Support
Managed By Controller	PC Software — CPE Assistant
Others
Package Contents	1*5GHz 11n 12dBi 300Mbps outdoor CPE O2
	1*Power Adapter
	1*PoE Injector
	1*Quick Installation Guide
Operating Temperature	-30? ~ 60?
Storage Temperature	-40? ~ 70?
Operating Humidity	10%~90% non-condensing
Storage Humidity	10%~90% non-condensing
Default login IP	192.168.2.1
Default Login Username	admin
Default Login Password	admin
Certifications	FCC/CE/RoHS

Downloads

Tenda O2 Point to Point Outdoor CPE

• Tenda O2 Point to Point Outdoor CPE