sE Electronics sE2300 Condenser Microphone with Shockmount and Filter

The sE Electronics sE2300 is a Multi Pattern Large Diaphragm Condenser Microphone with Shockmount and Filter. The condenser sE Electronics on the map many years ago with its smooth, polished sound for vocals, voiceovers, and numerous instrumental applications. The cardioid version grew famous through use with world-class vocal artists like Amy Winehouse, and this multi-pattern version only increases its versatility, enhancing its usefulness for any instrument and reviving the spirit of the world’s most classic studio microphones. State-of-the-art components and a shorter, optimized signal path provide even better noise performance & clarity, multiple patterns and new pad & filter options increase its versatility, and the fit & finish has been updated with sE’s latest manufacturing techniques – but the sE2300 retains all the classic sound of the original. The sE2300 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect.

Three Selectable Polar Patterns

The 3-position Pattern Switch is located on the rear side of the microphone, and allows the sE2300’s polar pattern to be changed from omnidirectional to cardioid to figure-eight. This allows for great control over the balance between direct and ambient sound.

Traditional Class-A Electronic Design

Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2300’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances.

Two Switchable Attenuation Levels & Low-Cut Filters

The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments…think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.

Custom-Built Output Transformer

Reviving the spirit of classic studio microphones, the sE2300’s custom transformer provides superb depth & weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation.

The Isolation Pack

For situations where greater rumble control and ‘plosive protection is desired, this bundle also includes sE’s Isolation Pack. With the twist of a single knob, the mount attaches quickly and securely to the microphone, and is removable with the same simple motion. This allows the mic to be set up quickly and easily – no adjustments, no hassle. The Isolation Pack also comes equipped with sE’s curved metal pop filter, which efficiently slots in to the shockmount and is vertically adjustable for best performance.

In The Box

• Se2300 Studio Condenser Microphone.
• Isolation Pack Shockmount, Pop Filter.
• Thread Adapter.
• Se Logo Sticker.
• User Manual with Warranty Card.

Product Specifications:

Capsule Type: Hand-crafted 1″ True Condenser

Polar Pattern: Cardioid, Omni-directional, Figure-8

Frequency range: 20 Hz – 20 kHz

Sensitivity: 24 mV/Pa (-32.5 dBV)

Max SPL: 126 / 136 / 146 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)

Equivalent noise level: 9 dB(A)

Dynamic range: 117 / 127 / 137 dB (0/10/20 dB Attentuation pad)

Signal to Noise Ratio: 85 dB

Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable

Attenuation Pad: 10 / 20 dB, switchable

Powering: 48 Volts according to IEC 61938

Electrical Impedance: 40 Ohms

Recommended load impedance: >1k Ohms

Current consumption: 4.8 mA

Connectivity: 3-pin male XLR connector

Dimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)

Weight: 611 g (21.55 oz.)