Rack and Pinion – Power – 1957-59 Ford – Ford FE – 8011400

Time to upgrade your classic Ford’s steering. Do it with Unisteer’s bolt in rack & pinion system for a superior steering experience! Engineered to match the stock suspension of these classic cars! Sorry it will not work on Trucks.

This is a rear steer center take-off style rack and pinion with a ball center bar that exactly matches the center link of the stock suspension for the ’57-’59 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that held the steering box and idler arm.

This kit is designed for use with Traditional FE Block Motors found with these cars, the Ford 332 and 352. This kit has been installed on vehicles with stock manifolds. Other Headers may work, but might require modification or another u-joint in the column linkage.

Note: This kit will not work with the factory column shifter, but it will work with an aftermarket column shifter.

Click to view instruction sheet

Tech Info:

Pinion Type/Size:  17mm DD

Amount of Travel:  6″

Turns Lock to Lock:  2.5 – 2.75 Turns

Pressure Port Size:  18mm – 6AN Banjo

Return Port Size:  16mm – 6AN Banjo

Pump Required:  Low Flow / Pressure

Inner End Threads:  9/16″-18

Outer ends:  Included

Kit Includes:

Rack and Pinion

Mounting Bracket

Mounting Hardware

Outer Tie Rod Ends

Pump and Line Kit

Steering Shaft Kit