Summa Pneumatic Oscillating Tool-L

The Pneumatic Oscillating Tool-L (POT-L) is capable of cutting materials up to 42mm thick. The robust construction of the tool makes it suitable for cutting thick material, such as honeycomb board, corrugated board, and foam board. The POT-L is similar to the POT but is used with a longer type of knife, perfect for cutting soft material with a minimum thickness of 20 mm and a maximum thickness up to 42 mm.

Includes:

• Pneumatic Oscillator with Gliding Disk
• 1 POT-L knife L50 T1.0 with hex key
• Pneumatic Kit, including Pneumatic Oil and Oil Mister
• Installation Guide and Collar Wrench

Note: Air-compressor not included.

Specifications

• Stroke: 8mm*
• Frequency: 150Hz*
• Compressed Air Requirements: 6bar & 78l/min.
• It is advised that the compressor have 4-5 times the airflow capacity: +/- 360l/min

* The Stroke and Frequency may drop depending on the load on the tool.

This tool can be used with the following materials:

Compatibility

• Summa F Series Flatbed Cutter