SaniServ 414 | 17″ Wide 20 Qt. Single Hopper Floor Model Soft Serve Ice Cream Machine

Description

The SaniServ ® model 414 Soft Serve Freezer provides high profit, consistent quality soft serv and yogurt products in a traditional single barrel design! The ease of operation of the 414 is a favorite among owners and operators. The high production capacity and recovery time insures the 414 is the perfect piece of equipment for satisfying customer demand. Produces seven – 4 ounce servings per minute.

Features

• Floor Model
• Seven – 4 oz. Servings per Minute
• 20 Quart Capacity
• Air or Water Cooled
• Available in 208-230V electrical configuration

Product Dimensions: 56.5″(h) x 17″(w) x 24.8″(d)

Minimum Wall Clearance: 6

Refrigerant Type: R404A

Shipping Cubed Feet: 32.4

Warranty

Parts – 1 year

Compressor – 5 years

Evaporator – 5 Years

Subject to the terms, conditions and limitations herein, SaniServ warrants to the original purchaser that its equipment, as originally supplied, is free from defects in materials and workmanship, and will perform adequately under normal use and service.

Standard Warranty

SaniServ will replace or repair any part or parts SaniServ found to be defective in material or workmanship for
a period of one (1) year from date of installation, but no more than a maximum of (18) months from
the date of manufacture. The compressor and evaporator shall have a five (5) year warranty.

Warranty labor coverage at SaniServ SaniServ SaniServ’s standard rates during normal weekday business hours is provided
to repair or replace any component found defective under the terms of the SaniServ SaniServ SaniServ warranty for a period
of (90) days from the date of the original installation. Overtime, weekend, and holiday premiums will be
the responsibility of the buyer.

The warranty for models DF200 and 108C is limited to ninety (90) days for parts and thirty (30) days
labor with one (1) year on the compressor and evaporator assemblies.

All warranty work must be performed by a SaniServ SaniServ SaniServ Authorized Service Representative or at SaniServ SaniServ’s niServ
manufacturing facility. All warranty parts must be OEM and obtained through a SaniServ SaniServ SaniServ authorized parts
distributor.

This warranty applies only to the original purchaser at the original installation location, and is only good if customer: (i) purchases and completes Check, Test and Start (CTS) service ($375 for single-barrel machines and $475 for double-barrel machines); (ii) returns the fully completed CTS warranty registration form to SaniServ within thirty (30) days of the date of purchase by the original purchaser-user but not to
exceed eighteen (18) months from date of shipment from factory.

Any use of SaniServ equipment prior CTS completion will void all warranties. If, upon inspection by SaniServ or its Authorized Service Representative, SaniServ it is determined that this equipment has not been properly installed, the warranty will be void.

If the nameplate or other identifying marks have been removed, defaced or changed or the unit has been repaired or altered by persons other than expressly approved by SaniServ, the warranty will be void.

This Limited Warranty does NOT cover; (i) rubber and non-metallic synthetic parts including, but not limited to, gaskets, o-rings, scraper blades, faceplates, rear seals, electrical cords, belts, drip trays, machine legs, or hoses; (ii) calibrations, product consistency adjustments, end-user training, or belt realignments once the CTS has been completed; (iii) repairs required because of failure to regularly clean
and maintain the equipment in accordance with instructions in the Operator’s Manual; (iv) repairs required because the equipment has been; (a) altered or repaired other than by a SaniServ SaniServ SaniServ Authorized Representative, (b) damaged due to misuse or misapplication, neglect, abuse, accident, fire, flood, riot or
acts of God, (c) used other than in accordance with the procedures and instructions contained in the Operator’s Manual, or (d) damaged during transit or delivery; (v) equipment failure caused by inadequate water quality, improper cleaning, harsh chemicals or acids.

When any situation occurs which voids the warranty, the manufacturer shall not be liable for any damage to any person or any property which may result from the use of the equipment thereafter. Warranty is limited to SaniServ manufactured products only and does not apply to other equipment which may be connected to or installed within.

Shipping

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options.

You can view our shipping policy here.

Returns/Refunds/Damages

Customers have 48 hours to inspect and report damages & no item may be returned after 30 days of the original ship date from our facilities. 

Items that are returned damaged or without proper packaging materials are subject up to a 25% restock fee.

Product Specifications

Brand	SaniServ
Model Number	522
Weight	675 lbs
Width	26″
Depth	30″
Height	59.5″
Installation Type	floor model
Operation Type	Gravity Fed
Cooling	air or water cooled
Hopper Quantity	2
Hopper Capacity Each (Qt)	17
Cylinder Quantity	2
Cylinder Capacity Each (Qt)	21.2
Exterior Finish	stainless steel
Refrigeration	self-contained refrigeration
Valves	3
Flavors	2
Voltage	208/230, 220
Phase	1, 3
Production Per Hour	840 cones

Documents

Spec Sheet