Chimiver Ecofast UV LED water-based Curing Lacquer for Wooden Floors

Upgrade your wooden floors with CHIMIVER ECOFAST UV, a single-component water-based LED curing lacquer that utilizes a 395 nm LED wavelength for optimal performance. Its high resistance to foot traffic and abrasion makes it ideal for high wear environments, and it can be easily cross-linked with Walk Behind UV LED Floor Curing System. Get quickly usable wood flooring with CHIMIVER ECOFAST UV LED.

This product requires curing with an LED UV System. We recommend utilizing our Walk Behind Floor Curing System or an UV LED Curing Conveyor or our CureUV 300W Compact Handheld Curing System for optimal results.

Why choosing LED systems?

The modern world is changing at a rapid pace, and sustainability is now crucially important. Merely creating new products and streamlining business processes is not enough; it must be done responsibly by fostering a cohesive network within the supply chain. Chimiver is committed to being a leader in the global shift towards ecological transition, recognizing its significance on all levels.

Characteristics:

• Mixture ratio: Single-component.
• Application temperature: 50°F ÷ 77°F.
• Application: 0.31 in microfiber roller.
• Thinning: Water (suggested 5% – max 10%)
• Coverage: 9.29 m2 per liter
• pH: 7,5 ÷ 8,5
• Flash-Of: 40′-60 (at 68°F and 65% R.H.)
• Gloss level: 5
• Wood oxidation: Light.
• Storage stability: 6 months.

How to Use Chimiver Ecofast UV-LED:

• After preparing the wood and sanding it with 120/150 grit paper, use a roller to apply the first coat of the product. Wait for the water to completely evaporate for at least 1 hour before proceeding to cross-linking with LED lamps with Walk Behind UV LED Floor Curing System.
• Sand ECOFAST UV LED with 220/320 grit paper and then apply the second coat of ECOFAST UV LED and wait for the complete evaporation of the water.
• Proceed again to crosslink with LED lamps, sand with 320 grit paper or alternatively scotch brite bordeaux, and apply the third coat of ECOFAST UVLED if necessary.
• Wait for the water to evaporate completely and then proceed to the LED light curing with Walk Behind UV LED Floor Curing System.
• The floor is immediately walkable.

Features:

• No VOCs, No Solvent Smells, and Non-Flammable
• 100% UV-curable products don’t evaporate or shrink
• Recommended Usage: Wooden floors 

 

Technical Data Sheet:

Brochure:

Certifications:

Conversion table
1 Liter	0.26 Gallon
5 Liters	1.32 Gallons

 

Coatings are non-returnable and non-refundable

 

 

If you have any questions or are unsure about anything, feel free to reach out at [email protected] or call us at (561) 243-8442.