Accusize Industrial Tools 0.011” to 0.060”, 50 Pc Steel Plug Pin Gage Set, Minus, Class Zz, M0(-) 0.011″-0.060″

Accusize Industrial Tools 0.011” to 0.060”, 50 Pc Steel Plug Pin Gage Set, Minus, Class Zz, M0(-)

Accusize Industrial Tools Minus Pin Gage Sets AccusizeMinus Pin Gage Sets Class ZZEach gage is electro-etched with its actualsize.Tolerance for minus set tolerance: +0.0000″ / -0.0002″All gages are 2″long, center less lapped.Hardness: Each Accusize pin gage is heat treated to ahardness of 60-62 Rockwell C drill rod, providing the pin gages higherdurability and quality.Finish: each gage has a 10 micro finish or better.Instrong case. Briefly introducing pin gage Pin gages, also known as plug gages,manufactured with a specific size and durable materials, are used to test holesizes, especially small holes and to verify the diameter of holes and slots.They are used to quickly determine whether hole sizes are within certaintolerance or not. Moreover, they’re used as test bars for geometric deviationmeasurement. They’re commonly used in combination with go/no-go pin gagehandles to produce a “Go-No Go” gage that quickly qualifies a bored hole. Pinsare especially useful for gaging the straightness of a relatively deep bore.The Accusize go/no-go pin gage handles can work with our pin gage sets toproduce a “Go-No Go” gage. These handles can be purchased separately.Features: Each pin gage set comes with a Certification of Performance.Class ZZTolerance Measuring Small Holes with Pin Gauges Calipers are unreliable formeasuring small holes; therefore, we need pin gages.Accusize pin gages rangewidely from 0.011″ to 1.000″. You can use them to measure a huge number ofsmall holes. Cautions when using pin gages: Prepare pin gage handles (Go/No Gohandles).Clean the measurement surface with a benzine or a dry cloth.Weargloves to prevent body temperature influencing the accuracy of themeasurement. The temperature difference between your hands and pin gages maylead to an expansion of the pin gage.Remove dust and fingerprints. Then, applyanti-rust oil to save the tool life.Keep the pin gages in the environment withsmall humidity changes and temperature variations. Calibrate Micrometers Pingages are a good deal in common as calibration for micrometers and calipers.For example, you can use a 0.300” pin gage to verify the micrometer shootingfor 0.300”. Go/No Go Gage Handle You can purchase our Go/No Go pin gage handleseparately, so that you can use it with our pin gages to produce Go/No gage.Itwill be ideal to check a workpiece against its allowed tolerance via go/no-gotestPut the pin gage inside the Go/No Go pin gage handle. If it fits the Goside, it is within tolerance of the hole. If it fits the No-Go side, it is outof tolerance of the hole. Measuring Groove Verify the accuracy of a groovewidth of a work piece after processing by sliding the pin gage through thegroove Measurement between holes You can use pin gages to measure the distancebetween holes. The formula is shown in the picture. Read more Accusize M0(-)0.011″-0.060″ Steel Plug Pin Gage Minus Set Accusize M1(-) 0.061″-0.250″ SteelPlug Pin Gage Minus Set Accusize M1(-)A 0.061″-0.250″ Steel Plug Pin GageMinus Set Accusize M2(-) 0.251″-0.500″ Steel Plug Pin Gage Minus Set AccusizeM2(-)A 0.251″-0.500″ Steel Plug Pin Gage Minus Set Accusize M3(-)0.501″-0.625″ Steel Plug Pin Gage Minus Set Range 0.011″-0.060″ 0.061″-0.250″0.061″-0.250″ 0.251″-0.500″ 0.251″-0.500″ 0.501″-0.625″ Count 50 190 190 250250 125 Case Plastic Case Plastic Case Strong Aluminum Case Plastic CaseStrong Aluminum Case Plastic Case Accusize M4(-) 0.626″-0.750″ Steel Plug PinGage Minus Set Accusize M5(-) 0.751″-0.832″ Steel Plug Pin Gage Minus SetAccusize M6(-) 0.833″-0.916 Steel Plug Pin Gage Minus Set Accusize M7(-)0.917″-1.000″ Steel Plug Pin Gage Minus Set Accusize Go/No Go Pin Gage HandleAccusize Pin Gage Plus Set Range 0.626″-0.750″ 0.751″-0.832″ 0.833″-0.9160.917″-1.000″ 0.011″-0.060″ Count 125 82 84 84 Case Plastic Case Plastic CasePlastic Case Plastic Case Plastic Case Change of packaging To meet thechallenges of shipping in e-commerce, we’re continuously upgrading the outerpackaging of our pin gage set, which were packed in fragile plastic cases andare then redesigned.Accusize pin gages are now packed in strong plastic casesand some of them are in reliable and beautiful aluminum cases.We keepupgrading the packaging. Some of the pin gage sets come with really solidcases and packaging. In the future, we will make it stronger and stronger.

Product Features

• Size electro etched on each piece
• Tolerance: 0.0000″ to -0.0002″
• All members 2” long, centerless lapped
• Hardness: Heat treated 60-62 RC.
• 0.011”- 0.060” X 50PCS. Overall length 2”