Entry Radar Module (XM132)

• Entry Radar Module (XM132)
• Low-power distance measurement with mm accuracy
• Smart presence & Motion detection
• Parking space occupancy detection
• Level measurement (waste level, tank level)
• Low power consumption

The Entry Radar Module (XM132) is a module ready to be evaluated, integrated, and used for SW development in commercial products where low power consumption and low system cost are key.

The XM132 Entry Module is built around the Arm 32-bit Cortex-M0+ MCU from STMicroelectronics (STM32G071CBU6) and can be used as a stand-alone module where customer can embed their application on top of the Acconeer RSS (Radar System Software). It can also be used with an external host controller where communication to the module is via a register command protocol.

• 1 x Entry Radar Module (XM132)

Size

• 25 x 20 mm

PDF File

• Entry Radar Module (XM132) – Datasheet

• Sensor Type: A111 60 GHz pulsed coherent radar (PCR)
• MCU: ARM Cortex M0+ CPU STM32G071CBU6
• Programming interface: SW flash and SW debug with XE132 evaluation board
• Software: Module software, SDK, and Exploration tool available for download
• Board connector: Solderable
• Measures absolute range: Depends on object and application, typical max range between 0.5-10 m
• Multiple objects: Yes
• Half Power Beam Width (HPBW): 40° / 80°
• Need for open or visible aperture: No
• External Interfaces: UART, I2C, GPIO, Reset
• Power supply: Single supply operating voltage range: 1.8 to 3.6 V
• Power consumption: <0.05 mW at 0.1 Hz sweep rate
• Operating temperature: -40 to +85 °C