Waveshare Platform Cable USB Programmer & Debugger for Xilinx Devices

• Waveshare Platform Cable USB Programmer & Debugger for Xilinx Devices
• Utilizes a CY7C68013A+FPGA hardware solution
• Supports JTAG, Slave-Serial, and SPI interfaces
• Compatible with Xilinx ISE, iMPACT, ChipScope, Vivado
• Features firmware auto-upgrade capabilities
• Includes anti-static and multi-layer signal isolation

The Waveshare Platform Cable USB Programmer & Debugger for Xilinx Devices is a versatile tool designed for in-circuit configuration and programming of all Xilinx devices. It employs a CY7C68013A+FPGA hardware solution, ensuring compatibility with the original Xilinx Platform Cable USB and Platform Cable USB II. This device is capable of programming a wide range of Xilinx devices, including FPGAs, CPLDs, and ISP Configuration PROMs, through JTAG, Slave-Serial, and SPI interfaces.

The programmer supports devices operating at various voltage levels, including 5V, 3.3V, 2.5V, 1.8V, and 1.5V, and offers an optional target clock frequency with automatic adjustment via Xilinx software. It features firmware auto-upgrade capabilities, allowing it to support newly released software and devices. The device is equipped with anti-static and multi-layer signal isolation to safeguard both the target and the programmer.

This programmer is compatible with several Xilinx software tools, including Xilinx ISE, iMPACT, ChipScope, and Vivado. It supports a broad range of Xilinx FPGA, CPLD, and PROM devices, making it a comprehensive solution for developers working with Xilinx technology. The device includes an adapter board and multiple cables for seamless connection to official development boards or other circuit boards.

Note: Ensure correct connection of VCC and GND to prevent damage to the Platform Cable USB.

• 1x Waveshare Platform Cable USB Programmer & Debugger for Xilinx Devices
• 1x Platform Cable USB main unit
• 1x JTAG adapter
• 1x USB cable
• 1x 8-pin header to 7-pin separated cable
• 1x 8-pin header to 6-pin header cable
• 1x 14-pin (2.54mm pitch) JTAG cable
• 1x 14-pin (2mm pitch) JTAG cable
• 1x 10-pin (2.54mm pitch) JTAG cable

Website

• Utilizes CY7C68013A+FPGA hardware solution, compatible with Xilinx Platform Cable USB and Platform Cable USB II
• Programs all Xilinx devices, including FPGAs, CPLDs, and ISP Configuration PROMs
• Supports JTAG, Slave-Serial, and SPI programming for configuring all Xilinx devices
• Interfaces with devices operating at 5V, 3.3V, 2.5V, 1.8V, and 1.5V
• Offers optional target clock frequency and supports Xilinx software automatic frequency adjustment
• Features firmware auto-upgrade to support newly released software and devices
• Includes anti-static and multi-layer signal isolation to protect the target and the programmer
• Comes with an adapter board and multiple cables for easy connection with official development boards or other circuit boards
• Supported software includes Xilinx ISE, iMPACT, ChipScope, and Vivado
• Supported devices include Xilinx FPGA devices (UltraScale, 7 series, Zynq, Kintex, Virtex, Artix, Spartan), Xilinx CPLD devices (XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II), and Xilinx PROM devices (Platform Flash XCF00S, XCF00P, XL)
• LED status: Red indicates USB connected, Yellow indicates USB connected and Vref (the target board) is powered