Icon Tacoma 0-2″ EXP Suspension System – Stage 3 Billet UCA

Icon Toyota Tacoma 0-2″ EXP Suspension System – Stage 3 Billet UCA – 2005-Current

 

Any vehicle, much less an off-road vehicle, must have a reliable and sturdy suspension system. It can improve how well your car handles rocky terrain without harming it. We are therefore delighted to present the Icon suspension system made to fit the Tacoma models.

The 2005-current Toyota Tacoma’s ICON Stage 3 EXP suspension system offers better on and off-road performance, front and rear-end lifts, and the ability to handle up to 33″ tires. The 2.5 EXP series coilover shocks, sway bar relocation brackets, rear add-a-leaf, and our tried-and-true 2.0 Aluminum Series nitrogen-charged monotube shocks for the rear are all included in this system.

This Stage 3 system uses Tacoma EXP Series front shock absorbers, which combine high performance with the simplicity and financial advantages of using Tacoma’s factory coil spring and other parts. These shock absorbers have a 2.5-inch diameter and are fully rebuildable. EXP provides 0 to 2 inches of suspension elevation, custom-tuned performance, and the longest possible travel in a cost-effective package, bridging the gap between spacer lifts and threaded-bodied coilovers.

The supplied sway bar relocation brackets provide sway bar clearance from the EXP coilovers and reduce sway bar link bind throughout the suspension travel range. This makes it possible for the suspension to move more freely and to accommodate the complete range of wheel movement without placing undue stress on any OE parts.

The Toyota Tacoma will perform better overall thanks to the included ICON billet aluminum upper control arm kit, which will correct the front-end geometry, increase on-vehicle camber and caster adjustability, and improve clearance for suspension parts. Additionally allowing for complete bump and droop motion of the front suspension while removing bind is replacing the OE ball joint with the functional ICON Delta Joint.

By reducing the rear spring rate in comparison to stock, the rear leaf spring Add-a-Leaf kit enhances ride quality. This 3-leaf spring replaces the OE overload leaf during installation, doing away with the OE overload’s rapid ramp up in spring rate. This results in better off-road and on-road suspension performance as well as a 1.5″ raise in the truck’s rear above stock.

Rear shocks from the V.S. 2.0 Aluminum Series with remote reservoirs, made specifically for the 2005–present Tacoma, complete the Stage 3 EXP suspension system. The 2.0 Aluminum Series shocks are a premium improvement for the weekend warrior and daily street motorist seeking better on and off-road performance. They give your Tacoma balanced front-to-rear vehicle control and a fantastic driving experience when combined with the ICON 2.5 EXP Series front coilovers.

Upper Control Arm 

Whenever you are changing your vehicle’s geometry and upgrading it with a suspension kit, especially on 4WD vehicles, you absolutely need an upper control arm. The UCA is there to correct alignment and inherent clearance issues that arise when you lift or modify the suspension of your 4WD. Upper control arms can be found on independent front suspension (IFS) vehicles and they connect the top of the spindle to the frame.

The UCA is not a load-bearing piece of an IFS suspension, however, it does serve the purpose of guiding your spindle in a pre-determined motion when your suspension cycles up or down. Said load is handled by the lower control arm, which connects to the lower portion of the spindle.

Icon Tacoma Suspension System Feature

• Vehicle specific design for 2005-2022 Toyota Tacoma
• 2.5 EXP Series front shocks with internal reservoirs utilize factory coil and coil hardware
• Adjustable front ride heights from 0-2” of front lift over stock with the use of snap ring
• Included sway bar relocation brackets reduce ensure sway bar clearance from EXP coilovers
• Allows for full wheel travel without overstressing OE components
• Billet aluminum UCAs for added strength durability and on-vehicle caster/camber adjustment for optimum drivability
• UCAs feature the patented (U.S. Pat. 10731700) Delta Joint for extended longevity
• Rear Add-a-Leaf softens spring rate for improved ride quality while providing 1.5” of rear lift
• 2.0 Aluminum Series remote reservoir rear shocks provide balanced tune with coilovers and increased performance
• All ICON shock absorbers are fully rebuildable and re-tunable

Tech Info

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: ICON Alloys | 17×8.5 with 4.75” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 18×9 with 5.00” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 20×9 with 5.00” Backspace / 0mm Offset
• Recommended Aftermarket Tires: 33″ x 11.50″ (Minor fender trimming may be required)
• APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. LIFT HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE.
• APPLICATION NOTE #110: TRIMMING REQUIRED FOR RECOMMENDED TIRE SIZE
• APPLICATION NOTE #144: NOT COMPATIBLE WITH TRD PRO
• TECH NOTE: Not compatible with 2005-2015 rear wheel drive Tacomas with 5 wheel lug studs
• TECH NOTE: Not compatible with 2021-2022 Tacoma Trail

Included

• 58632 (QTY: 2) | 05-UP TACOMA FRONT 2.5 EXP COILOVER
• 611030 (QTY: 1) | 05-UP TACO/07-09 FJ SWAYBAR RELOCATION KIT
• 58550DJ (QTY: 1) | 05-UP TACOMA BILLET UCA DJ KIT
• 51100 (QTY: 1) | 96-UP TACOMA/00-06 TUNDRA 1.5″ ADD-A-LEAF KIT
• 56503R (QTY: 2) | 05-UP TACOMA 4WD 0-1.5″ REAR 2.0 VS RR

3rd Gen Tacoma Suspension Kit Stage 3 Installation Manual

View the coilover kit installation instructions HERE!

View the swaybar relocation kit installation instructions HERE!

View the leaf kit installation instructions HERE!

View the Billet UCA installation instructions HERE!

View the rear 2.0 VS RR installation instructions HERE!

ICON Warranty

View the ICON Vehicle Dynamics Warranty HERE!