Peavey Classic 50 410 2-Chnl 4×10 50 Watt Tube Guitar Amplifier + (2) Cables

Package Includes:

• (1) Peavey Classic 50 410 2-Channel 50 Watt Tube Guitar Amplifier
• (2) Rockville RCGT20B 20′ Nickel-Plated Black Cables
  

---

Authorized Peavey Dealer!

Video of CLASSIC 50/410:

Originally launched in 1991, these versatile all-tube amps retain their distinctive sound and circuitry but now feature an updated chassis design. With three 12AX7s up front and four EL84 power amp tubes plus normal and bright inputs, 3-band passive EQ, and presence control, it’s all the classic tone you seek and all the gigging versatility you need.

Features of CLASSIC 50/410:

• Peavey Classic 50 410 Guitar Amplifier Tweed Combo
• Normal and bright inputs
• Four EL84s and three 12AX7s
• 3-band passive EQ
• Presence control
• Normal and lead volume
• Lead pre- and post-gain
• Master volume
• Reverb control
• Effects loop
• Fan cooled
• Chrome-plated chassis
• Tweed covering
• Four 10 inch Blue Marvel® speakers
• Footswtich for channel switching and reverb (included)
• 50 watts (rms) into 16 or 8 ohms

Details:

• POWER AMPLIFIER SECTION
• Four 6BQ5/EL84’s with 12AX7 driver
• Rated Power & Load:
• 50 W RMS into 16 or 8 ohms
• Power @ Clipping (Typically):
• (5% THD, 1 kHz, 120 V AC line)
• 50 W RMS into 16 or 8 ohms
• (Bias must be reduced to measure)
• Frequency Response:
• +0, -2 dB, 50 Hz to 15 kHz, @ 40 W RMS into 16 ohms
• Hum & Noise:
• No greater than 80 dB below rated power
• Power Consumption:
• 200 watts, 50/60 Hz, 120 VAC (Domestic)
• PREAMP SECTION
• Two 12AX7’s
• The following specs are measured @ 1 kHz with the controls
• preset as follows:
• Pre & Post (lead) @ 0
• Reverb Level @ 0
• Bass & Treble EQ @ 12
• Middle EQ @ 0
• Master Volume @ 12
• Presence @ 6
• Nominal level is with Input Gain @ 6.
• Minimum level is with Input Gain @ 12.
• Preamp Normal Input:
• Impedance: Very high Z, 470 K ohms
• Lead Channel (Post Gain @ 10):
• Nominal Input Level:
• -40 dBV, 10 mV RMS
• Minimum Input Level:
• -70 dBV, 0.3 mV RMS
• Normal Channel:
• Nominal Input Level:
• -17 dBV, 140 mV RMS
• Minimum Input Level:
• -28 dBV, 40 mV RMS
• Maximum Input Level:
• 0 dBV, 1.0 V RMS
• Preamp Bright Input:
• Impedance: Very high Z, 470 K ohms
• +12 dB boost @ 2 kHz
• Equalization:
• (Lead and Normal Channels)
• Custom bass, middle, and treble passive-type EQ
• Effects Send:
• Load Impedance: 1 K ohm or greater
• Nominal Output Level: -6 dBV, 0.5 V RMS
• Effects Return:
• Impedance: High Z, 2 M ohms
• Designed Input Level: -6 dBV, 0.5 V RMS
• (Switching jack provides Effects Send to Effects Return
• connection when not used.)
• External Footswitch Function:
• Reverb Defeat (when reverb control is raised)
• Normal/Lead Channel Select (when Lead activated)

---

Video of RCGT20B:

Video of RCGT SERIES:

Description:

AllRockville pro audio cables are made with 100% copper which booststhe efficiency of the cable. There is nothing better than 100% copper.Most of the cheaper cables on the market do not use 100% copper, insteadthey make their cables with CCA (Copper Clad Aluminum). CCA cables donot perform on the level that 100% copper cables perform at. CCA willnot conduct signals efficiently. A 12 gauge CCA cable will not evenperform as well as a 14 gauge 100% pure copper cable, which will inturn, affect the performance and longevity of your equipment. If youfind cables on the market that do not mention the copper content, thereis a good chance that they are selling you a cheaper cable that is CCAand not 100% copper. Rockville pays an inspection company to overseethe manufacturing of the product to ensure that we provide a 100% OxygenFree Copper Cable (OFC). Our OFC cables are less prone to oxidation,and will provide maximum signal transfer.

The other importantfactor of a cable is the shielding. Most of the good brands on themarket have about 85% shielding coverage, so we decided to takeour shielding a step further. Rockville cables are shielded with a tightcopper mesh, covering 90% of the cable! The high percentage of coverageincreases the ability to absorb the Electromagnetic Interference (EMI)and Radio Frequency Interference (RFI) that suppresses signal anddegrades the performance of equipment. Rockville Cable’s coppershielding provides great flexibility, maintains a durable structuralintegrity, while decreasing signal interference ensuring enhanced signalclarity with every use.

Features:

• Rockville RCGT20 1/4” TS to 1/4” TS Guitar / Instrument Cable
• 24 AWG 100% Copper Conductors for Enhanced Signal Clarity
• Nickel Plated, 1/4″ Straight-to-Same Connectors
• High Density 90% Coverage OFC Braid Shield for Superior EMI and RFI rejection
• Length: 20 Ft
• Color: Black