Flux soldering paste Degufit 3000 soft soldering paste 100g with brush for drinking water installations with copper pipes | Flux paste soldering flux fitting soldering paste soldering paste soldering fitting soldering DVGW 100 g

Flux soldering paste Degufit 3000 soft soldering paste 100g with brush for drinking water installations with copper pipes | Flux paste soldering flux fittings soldering paste Solder Paste soldering fitting soldering DVGW

FURTHER INFORMATION ABOUT THIS PRODUCTSize: 100 gColour: GrayMelting range of the solder: approx. 227 – 310 °CMetal content: min. 60% by weight Chloride content: max. 9%Density of the solder: approx. 7.3 g/cm³Density of the solder paste: approx. 2.4 g/cm³ (20 °C)Viscosity of the solder paste: 300 – 500 dPa s (Haake Viscotester 02, Sp.2, 20 ±2 °C) Flux residue: corrosive; water-rinsableCleaning agent: waterDVGW test certificate. DV-0101AU2229Standards: Alloy No. according to ISO 3677 = Sn97Cu3 (solder); ISO 9454:2016 =Type 3.1.1.4 (flux)BrazeTec Degufit soft solder paste for installation technology The kit contains a practical plastic brush (brush holes) for distributing the paste. There is a special fixing handle on the lid of the container into which the brush can be inserted. Check out our offers and discover other products!💥

Product Features

• HIGH QUALITY – The BrazeTec Degufit 3000 soft solder paste is a mixture of soft solder powder, flux and a binder. It is used like flux and contributes to a high degree of filling of the solder paste and thus to improved strength!
• BEST CHOICE – It also prevents the pipes and fittings from overheating, as the soldering temperature is clearly visible when the solder temperature is reached. As stated, it must always be processed with additional soft solder!
• COMPLETE SET – The brush included in the packaging makes it easier to apply the paste thinly to the copper pipe and at the same time avoids unwanted skin contact!
• APPLICATION – After inserting the pipe end into the fitting, it is heated using a burner until a solder fillet becomes visible. Then soft solder is added. After soldering, the flux residues on the external surfaces must be removed according to DVGW by wiping with a damp cloth!
• TRUST MARK – The soft solder paste bears the DVGW test mark (DV-0101AU2229) and the quality mark of the Gutegemeinschaft Kupferrohr eV