2000 Watt Pneumatic Light Tower – Extends to 18 Feet – Two 1000W Metal Halide Lamps
$119.99
Specifications / Additional InformationPLM-18-2X1000W Pneumatic Light Tower Quick SummaryLength: 8 feet - 18 Feet8 - 18 Ft Extendable Mast Weight: 300 lbsPneumatic Operation Capacity: 150 lbsElectric Air Pump Operation: Pneumatic Mast – Electric Air PumpLights- UL 1572 & Wet Area Suitable Mounting:1/2″ thick, 12 inch Square, Four Hole BracketShipping:Common FreightShipping Weight:380 lbsOptions:Length- Mounting-Fixtures/…
| PLM-18-2X1000W Pneumatic Light Tower | Quick Summary |
| Length: 8 feet - 18 Feet | 8 - 18 Ft Extendable Mast |
| Weight: 300 lbs | Pneumatic Operation |
| Capacity: 150 lbs | Electric Air Pump |
| Operation: Pneumatic Mast – Electric Air Pump | Lights- UL 1572 & Wet Area Suitable |
| Mounting:1/2″ thick, 12 inch Square, Four Hole Bracket | |
| Shipping:Common Freight | |
| Shipping Weight:380 lbs | |
| Options:Length- Mounting-Fixtures/ Call Us for Special Requirements | Phone: 1-903-270-1187 |
| Toll Free: 1-800-369-6671 | |
| Fax: 1-903-498-3364 | |
| E-mail: |
‘Product Overview‘
| The PLM-18-2X1000W Pneumatic Light Tower from Larson Electronics is an 18 foot extendable light tower equipped with two metal halide light fixtures producing approximately 110,000 lumens each. The two 1,000 watt metal halide lamps produce a wide spread of intense white light, allowing this unit to effectively cover large work areas with high quality illumination. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*The PLM-18-2X1000W telescoping pneumatic light tower allows operators to quickly and safely deploy 2,000 watts of metal halide lighting in locations where elevated illumination is needed for maximum area coverage. This three section light boom can be extended to 18 feet for maximum area coverage and collapsed to 8 feet for stowage. A locking top mounting plate allows operators to easily remove the lamp assembly for storage or transport. The mast is elevated using an included 250 watt 220 Volt AC 50/60hz, 1/3 horsepower air compressor. An air release valve located at the base of this pneumatic mast allows operators to lower the tower. | |||||
|
|
|||||
| Included with this light tower are two of our wet area suitable metal halide fixtures producing a combined total of approximately 220,000 lumens at 2,000 watts. These lamps have 19†reflectors and are constructed of aluminum with a clear tempered glass lens which is secured into place with a heavy duty gasket and single ring lock. These floodlights produce a wide flood light pattern capable of illuminating approximately 2.5 acres. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom. All wiring runs through the mast, meaning no loose wires when the tower is collapses. These light masts are typically mounted to trailers or other stable surfaces via a 12 inch square, 1/2 inch thick mounting base-plate which has been drilled to accept four mounting bolts (3/4 inch). A 24 inch wide and 1/4 inch thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the four metal halide fixtures.We can equip this mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered LED lights with comparable power. We also offer a choice of either the manual 1,000 lbs hand winches included standard or optional electric winches. Call us at 1-800-369-6671 or contact us at to discuss any special custom ordering requirements. Suggested Applications: Construction sites, event lighting, emergency services, highway projects, industrial plants, mining, excavation, natural disaster relief, environmental cleanup, and anywhere a mobile light source with large area coverage capability is needed. |
Be the first to review “2000 Watt Pneumatic Light Tower – Extends to 18 Feet – Two 1000W Metal Halide Lamps”
Related products
LARSON ELECTRONICS
1.2 kW Solar Light Tower – 24′ Mast – 7.5′ Trailer – (6) 100W LED Lamps – 800aH Li-on Battery Pack
LARSON ELECTRONICS
20,000 Watt Generator – Water Cooled Diesel Engine – 30′ Telescoping Tower – 4 Metal Halide Fixtures
LARSON ELECTRONICS
1000 Watt High Pressure Sodium Flood Light – 110,000 Lumens – Slipfitter Mount – 120~277 Volts AC
LARSON ELECTRONICS
28W LED Bulb – 4′ T8 Lamp – 3500 Lumens – Dual Power Ends – Replacement or Upgrade for Fluorescent
LARSON ELECTRONICS
3-Phase Delta Buck/Boost Step-Up Transformer – 600V Primary – 480V Secondary – 9.6 Amps – 50/60Hz
LARSON ELECTRONICS
28W Flameproof LED Linear Fixture – 24V AC/DC – (2) 2′ T8 Lamps – ATEX/IECEx – IP66 – Surface Mount
Reviews
There are no reviews yet.