JL Audio M6-8IB-C-GWGW-I-4 8-inch Marine Subwoofer Driver (200W, 4 ohm) w/ RGB Lighting

Highlights

• 8″ 4-ohm marine subwoofer with RGB LED lighting
• Injection-molded mica-filled polypropylene woofer with synthetic rubber surround
• Transflective cone for even glow when lit, appears silver with lighting off
• Polymer basket and grille, with stainless steel back plate
• Marine-grade brass binding posts
• Marine-grade synthetic fiber spider
• Works in sealed or ported boxes and free air applications

Features

Marine Tested: JL Audio’s marine speakers are tested in ultraviolet chambers to simulate years of sun exposure, and salt fog chambers to simulate years of exposure to salt-water environments.

LED Illumination: There are multi colored LEDs mounted behind the cone in the speaker frame, to create a glow on the cone. Depending on what combination of LED wires is connected, they can light red, green, blue, yellow, pink, aqua, or white. A 12 volt power supply is needed to turn the LEDs on. JL Audio recommends a 750 mA fuse on the LED power lead of each speaker. The LEDs can also be controlled using JL Audio’s MLC-RC controller.

Materials: The woofer cone is mica-filled injection-molded polypropylene (IMPP) with UV inhibitors. The surrounds are synthetic rubber and the woofer uses a marine-grade synthetic fiber spider with a progressive roll design. The basket and grille are UV-resistant polymer; they encapsulate the woofer’s motor system to prevent corrosion.

Infinite-Baffle Operation: The M6-8IB is optimized for infinite baffle operation so that it can be installed in a variety of locations, without the need for a dedicated enclosure. If an enclosure is used, 1.5 ft³ is the minimum recommended volume.

Enclosure: If mounting in an enclosure, JL Audio recommends a 2 ft³ sealed (1.5 ft³ minimum) or 1.5 ft³ ported enclosure.

Specifications

• Handles up to 200 watts RMS
• Sensitivity: 86.8 dB
• Top-mount depth: 5-1/16″
• Cutout diameter: 7-3/8″
• Warranty: 2 years